What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Cumbria?
In Cumbria, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). That range is adjusted for the North West, where domestic building work typically costs around 6% below the national average. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,500–£4,250 |
| Larger or more complex projects | £4,250–£5,250 |
What moves the price most:
- Project size and complexity
- Planning or building regulations stage
- Structural engineer’s fees
- Measured survey complexity
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Planning and building regulations in Cumbria
Before anything is built in Cumbria, we confirm which approvals apply in England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Tender-ready drawing pack
- Planning drawings: plans, elevations, site and location plans
- Structural calculations coordinated
- 3D views on request
- Design options and sketch layouts
- Building regulations drawings and specification
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Cumbria
Terraced streets across the North West often suit rear dormers and single-storey kitchen extensions.
Towns we cover in Cumbria include Carlisle, Barrow in Furness, Kendal, Whitehaven and Workington.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Application drawings
Plans, elevations and supporting documents prepared for the council.
- 04
Submission and follow-up
We submit the application and deal with questions from the council or building control.
Questions about architectural drawings in Cumbria
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
Do you prepare architectural drawings in Cumbria?
Yes. We prepare architectural drawings across Cumbria, including postcodes CA1, CA10, CA11, CA12 and CA13. Every project starts with a free home visit.
How long do drawings take?
Typically 2 to 6 weeks from survey, depending on revisions.
Do you prepare structural calculations?
We coordinate a chartered structural engineer for calculations and beam designs.
How much does a set of architectural drawings cost in Cumbria?
In Cumbria, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.