What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Ellesmere Port Town?
In Ellesmere Port Town, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). The guide for Ellesmere Port Town reflects typical costs in the North West, roughly 6% below the UK-wide figure. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,500–£4,250 |
| Larger or more complex projects | £4,250–£5,250 |
The biggest cost drivers are:
- 3D visuals
- Number of design options
- Measured survey complexity
- Project size and complexity
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Planning and building regulations in Ellesmere Port Town
Before anything is built in Ellesmere Port Town, we confirm which approvals apply in England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
On a typical set of architectural drawings we handle:
- Design options and sketch layouts
- 3D views on request
- Party wall drawings where needed
- Building regulations drawings and specification
- Planning drawings: plans, elevations, site and location plans
- Structural calculations coordinated
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Ellesmere Port Town
Terraced streets across the North West often suit rear dormers and single-storey kitchen extensions.
From CH2 outwards, we take on projects throughout Ellesmere Port Town and the surrounding parts of Cheshire.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Drawings and documents
The drawings and forms the council and building control need.
- 04
Submission and follow-up
We submit the application and deal with questions from the council or building control.
Questions about architectural drawings in Ellesmere Port Town
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
Do you prepare architectural drawings in Ellesmere Port Town?
Yes. We prepare architectural drawings across Ellesmere Port Town, including postcodes CH2 and CH65. Every project starts with a free home visit.
What are building regulations drawings?
More detailed drawings and specifications showing structure, insulation, fire safety, drainage and ventilation, used for building control approval and pricing.
How much does a set of architectural drawings cost in Ellesmere Port Town?
In Ellesmere Port Town, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.