What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Hemel Hempstead?
In Hemel Hempstead, a set of architectural drawings typically costs £1,500–£4,750 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Building costs in the East of England run about 6% above the UK average, and the figures for Hemel Hempstead are adjusted to reflect that. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,500–£4,750 |
| Larger or more complex projects | £4,750–£6,000 |
Your quote will depend mainly on:
- 3D visuals
- Measured survey complexity
- Number of design options
- Project size and complexity
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Planning and building regulations in Hemel Hempstead
Approvals for a set of architectural drawings in Hemel Hempstead follow the rules for England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
What we take care of:
- 3D views on request
- Structural calculations coordinated
- Measured survey of the existing house
- Party wall drawings where needed
- Planning drawings: plans, elevations, site and location plans
- Building regulations drawings and specification
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Hemel Hempstead
Across the East of England, 1930s and post-war semis, newer estates and rural cottages all feature, each with different extension and loft options.
Hemel Hempstead sits in Hertfordshire, about 16 miles west of Hertford. We cover the whole of Hemel Hempstead, including postcodes HP3.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Design options
Sketch layouts to agree the approach before detailed drawing starts.
- 03
Application drawings
Plans, elevations and supporting documents prepared for the council.
- 04
Approval
We follow the application through to a decision and pass on the approved drawings.
Questions about architectural drawings in Hemel Hempstead
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
Do you prepare architectural drawings in Hemel Hempstead?
Yes. We prepare architectural drawings across Hemel Hempstead, including postcodes HP3. Every project starts with a free home visit.
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.
How long do drawings take?
Typically 2 to 6 weeks from survey, depending on revisions.
How much does a set of architectural drawings cost in Hemel Hempstead?
In Hemel Hempstead, a set of architectural drawings typically costs £1,500–£4,750 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.