What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost on the Isle of Wight?
In the Isle of Wight, a set of architectural drawings typically costs £1,750–£5,000 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Prices across the South East are typically 12% above the UK average for this kind of work, which is reflected in the range for the Isle of Wight. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,750–£5,000 |
| Larger or more complex projects | £5,000–£6,250 |
The main things that change the cost:
- Structural engineer’s fees
- Project size and complexity
- Number of design options
- 3D visuals
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Planning and building regulations on the Isle of Wight
Approvals for a set of architectural drawings in the Isle of Wight follow the rules for England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most architectural drawings:
- Planning drawings: plans, elevations, site and location plans
- 3D views on request
- Building regulations drawings and specification
- Structural calculations coordinated
- Tender-ready drawing pack
- Party wall drawings where needed
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building on the Isle of Wight
The South East has a broad mix of housing, from Victorian terraces in the towns to post-war semis and newer estates, so extension types vary street by street.
Towns we cover on the Isle of Wight include Newport, Ryde, Cowes and Sandown.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Application drawings
Plans, elevations and supporting documents prepared for the council.
- 04
Submission and follow-up
We submit the application and deal with questions from the council or building control.
Questions about architectural drawings on the Isle of Wight
Do you prepare structural calculations?
We coordinate a chartered structural engineer for calculations and beam designs.
Do you prepare architectural drawings in the Isle of Wight?
Yes. We prepare architectural drawings across the Isle of Wight, including postcodes PO30, PO31, PO32, PO33 and PO34. Every project starts with a free home visit.
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.
Do I need an architect?
Not necessarily. For extensions and lofts, an architectural technician’s drawings are common. For complex or sensitive sites, an architect may be better.
How much does a set of architectural drawings cost in the Isle of Wight?
In the Isle of Wight, a set of architectural drawings typically costs £1,750–£5,000 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.