What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Middlesbrough?
In Middlesbrough, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Building costs in Yorkshire and the Humber run about 7% below the UK average, and the figures for Middlesbrough are adjusted to reflect that. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,500–£4,250 |
| Larger or more complex projects | £4,250–£5,250 |
Your quote will depend mainly on:
- 3D visuals
- Project size and complexity
- Planning or building regulations stage
- Measured survey complexity
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Planning and building regulations in Middlesbrough
Before anything is built in Middlesbrough, we confirm which approvals apply in England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
On a typical set of architectural drawings we handle:
- Structural calculations coordinated
- Design options and sketch layouts
- Measured survey of the existing house
- Tender-ready drawing pack
- Planning drawings: plans, elevations, site and location plans
- Party wall drawings where needed
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Middlesbrough
Yorkshire and the Humber has stone and brick terraces as well as inter-war and newer estates, so materials matching is an early design question.
From TS1 outwards, we take on projects throughout Middlesbrough and the surrounding parts of North Yorkshire.
How it works
- 01
Survey and brief
We visit, talk through what you want and record the existing building.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Application drawings
Plans, elevations and supporting documents prepared for the council.
- 04
Approval
We follow the application through to a decision and pass on the approved drawings.
Questions about architectural drawings in Middlesbrough
Do you prepare architectural drawings in Middlesbrough?
Yes. We prepare architectural drawings across Middlesbrough, including postcodes TS1 and TS4. Every project starts with a free home visit.
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.
Do I need an architect?
Not necessarily. For extensions and lofts, an architectural technician’s drawings are common. For complex or sensitive sites, an architect may be better.
How much does a set of architectural drawings cost in Middlesbrough?
In Middlesbrough, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.