What is a barn conversion?
A barn conversion turns an agricultural or rural building into a home while keeping its character: the brick or stone walls, roof timbers and large openings. It involves structural repair, insulation, new services and often a new floor slab.
How much does a barn conversion cost in Derbyshire?
In Derbyshire, a barn conversion typically costs £1,700–£2,850 per m² of floor area, including VAT at usually 5% (reduced rate for creating a new dwelling). For a typical 150 m² project that is roughly £255,000–£427,500. Building costs in the East Midlands run about 5% below the UK average, and the figures for Derbyshire are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (105 m²) | £178,500–£299,000 |
| Typical project (150 m²) | £255,000–£427,500 |
| Larger project (210 m²) | £357,000–£598,500 |
| Rate per m² | £1,700–£2,850 |
Your quote will depend mainly on:
- Planning conditions and ecology
- Condition of the existing structure
- Glazing and finishes
- Services and drainage
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a barn conversion in Derbyshire?
Whether you need planning permission depends on your house and its location in England. In England converting an agricultural building into a home needs either full planning permission or prior approval under Class Q of the permitted development rules, which limits floor space and the number of homes. Listed barns also need listed building consent.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
What we take care of:
- Structural repairs and new floor slab
- New roof covering where needed
- Structural survey and feasibility
- Building control completion
- Services, drainage and septic or treatment plant
- Planning or prior approval application
How long does it take?
The build itself usually takes 6 to 12 months on site depending on condition. Allow time beforehand for drawings and approvals, usually 4 to 9 months.
Building in Derbyshire
In the East Midlands, many estates built since the 1960s have integral garages that convert well into a study or bedroom.
Towns we cover in Derbyshire include Derby, Chesterfield, Long Eaton, Ilkeston, Swadlincote and Staveley.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about barn conversions in Derbyshire
How much does a barn conversion cost in Derbyshire?
In Derbyshire, a barn conversion typically costs £1,700–£2,850 per m² of floor area, including VAT at usually 5% (reduced rate for creating a new dwelling). A typical 150 m² project comes to roughly £255,000–£427,500. Your fixed price depends on the survey and drawings.
What about drainage without mains sewer?
A sewage treatment plant can be installed, subject to the environmental regulator’s rules where you live.
Can I get a mortgage for a barn conversion?
Specialist self-build and conversion mortgages release money in stages. We can provide the staged costings lenders ask for.
Do I need planning permission for a barn conversion?
Yes. A barn conversion needs planning permission or, in England only, prior approval under the agricultural permitted development rules where the building qualifies. Listed barns also need listed building consent.
How long does a barn conversion take in Derbyshire?
Typically 6 to 12 months on site depending on condition. Design and approvals beforehand usually take 4 to 9 months.