What is a barn conversion?
A barn conversion turns an agricultural or rural building into a home while keeping its character: the brick or stone walls, roof timbers and large openings. It involves structural repair, insulation, new services and often a new floor slab.
How much does a barn conversion cost in Didcot?
In Didcot, a barn conversion typically costs £2,000–£3,350 per m² of floor area, including VAT at usually 5% (reduced rate for creating a new dwelling). For a typical 150 m² project that is roughly £300,000–£502,500. We start from a UK-wide guide and adjust it for the South East, where labour and materials are typically about 12% above average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (105 m²) | £210,000–£352,000 |
| Typical project (150 m²) | £300,000–£502,500 |
| Larger project (210 m²) | £420,000–£703,500 |
| Rate per m² | £2,000–£3,350 |
The biggest cost drivers are:
- Planning conditions and ecology
- Insulation approach
- Condition of the existing structure
- Services and drainage
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a barn conversion in Didcot?
Whether you need planning permission depends on your house and its location in England. In England converting an agricultural building into a home needs either full planning permission or prior approval under Class Q of the permitted development rules, which limits floor space and the number of homes. Listed barns also need listed building consent.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
From survey to sign-off, the job normally involves:
- Services, drainage and septic or treatment plant
- Ecology and bat survey coordination
- New roof covering where needed
- Insulation that respects the existing fabric
- Structural repairs and new floor slab
- Planning or prior approval application
How long does it take?
Build time is typically 6 to 12 months on site depending on condition. Design and approvals come first and typically take 4 to 9 months, depending on the approval route.
Building in Didcot
Commuter towns across the South East have many 1930s and post-war semis that suit rear extensions and hip-to-gable loft conversions.
Our Didcot coverage includes postcode districts OX11, and we also work in nearby places such as Abingdon, Oxford and Thatcham.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about barn conversions in Didcot
What about drainage without mains sewer?
A sewage treatment plant can be installed, subject to the environmental regulator’s rules where you live.
Do I need a bat survey?
Very often. Barns are common bat roosts, and planning authorities usually ask for an ecology survey.
Do I need planning permission for a barn conversion?
Yes. A barn conversion needs planning permission or, in England only, prior approval under the agricultural permitted development rules where the building qualifies. Listed barns also need listed building consent.
How long does a barn conversion take in Didcot?
Typically 6 to 12 months on site depending on condition. Design and approvals beforehand usually take 4 to 9 months.
How much does a barn conversion cost in Didcot?
In Didcot, a barn conversion typically costs £2,000–£3,350 per m² of floor area, including VAT at usually 5% (reduced rate for creating a new dwelling). A typical 150 m² project comes to roughly £300,000–£502,500. Your fixed price depends on the survey and drawings.