What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Gosport?
In Gosport, a basement conversion typically costs £2,150–£3,600 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £64,500–£108,000. That range is adjusted for the South East, where domestic building work typically costs around 12% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £45,000–£75,500 |
| Typical project (30 m²) | £64,500–£108,000 |
| Larger project (42 m²) | £90,500–£151,000 |
| Rate per m² | £2,150–£3,600 |
The biggest cost drivers are:
- Floor lowering and underpinning
- Lightwells
- Existing cellar or new excavation
- Waterproofing system
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a basement conversion in Gosport?
Before anything is built in Gosport, we confirm which approvals apply in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
Handled as part of most basement conversions:
- Underpinning or new structure where needed
- Lightwells and windows
- Waterproofing design (tanking or cavity drain membrane)
- Party wall notices
- Building control sign-off
- Insulation, ventilation and drainage pumps
How long does it take?
Build time is typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Gosport
Commuter towns across the South East have many 1930s and post-war semis that suit rear extensions and hip-to-gable loft conversions.
We work across Gosport and neighbouring areas such as Portsmouth, Southsea and Fareham. Postcodes we cover in Gosport include PO12.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about basement conversions in Gosport
Do I need party wall agreements?
In England and Wales, excavating near a neighbour’s foundations usually triggers the Party Wall etc. Act 1996.
Do you build basement conversions in Gosport?
Yes. We build basement conversions across Gosport, including postcodes PO12. Every project starts with a free home visit.
How much does a basement conversion cost in Gosport?
In Gosport, a basement conversion typically costs £2,150–£3,600 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £64,500–£108,000. Your fixed price depends on the survey and drawings.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.