What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Haverfordwest?
In Haverfordwest, a basement conversion typically costs £1,750–£2,950 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £52,500–£88,500. Prices across Wales are typically 8% below the UK average for this kind of work, which is reflected in the range for Haverfordwest. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £37,000–£62,000 |
| Typical project (30 m²) | £52,500–£88,500 |
| Larger project (42 m²) | £73,500–£124,000 |
| Rate per m² | £1,750–£2,950 |
The biggest cost drivers are:
- Ground water and access
- Waterproofing system
- Floor lowering and underpinning
- Lightwells
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a basement conversion in Haverfordwest?
Approvals for a basement conversion in Haverfordwest follow the rules for Wales. In Wales converting an existing cellar usually does not need planning permission; new excavation and lightwells may.
The Party Wall etc. Act 1996 applies in Wales, so notices must be served before work on a shared wall, on the boundary, or excavation close to a neighbour’s foundations.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
From survey to sign-off, the job normally involves:
- Insulation, ventilation and drainage pumps
- Underpinning or new structure where needed
- Waterproofing design (tanking or cavity drain membrane)
- Building control sign-off
- Structural and ground survey
- Electrics, heating and plastering
How long does it take?
Build time is typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Haverfordwest
Wales has many terraced valley streets, stone cottages and post-war estates, so extension designs are shaped by slopes, materials and local character.
Projects in Haverfordwest (SA61) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about basement conversions in Haverfordwest
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How long does it take?
A cellar conversion takes around 8 to 16 weeks; new basements take longer.
Who approves a basement conversion in Haverfordwest?
Planning matters in Haverfordwest go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Do I need planning permission for a basement conversion in Haverfordwest?
In Wales converting an existing cellar usually does not need planning permission; new excavation and lightwells may.
How much does a basement conversion cost in Haverfordwest?
In Haverfordwest, a basement conversion typically costs £1,750–£2,950 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £52,500–£88,500. Your fixed price depends on the survey and drawings.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.