What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Kempston Hardwick?
In Kempston Hardwick, a basement conversion typically costs £2,000–£3,400 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £60,000–£102,000. That range is adjusted for the East of England, where domestic building work typically costs around 6% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £42,000–£71,500 |
| Typical project (30 m²) | £60,000–£102,000 |
| Larger project (42 m²) | £84,000–£143,000 |
| Rate per m² | £2,000–£3,400 |
The biggest cost drivers are:
- Waterproofing system
- Existing cellar or new excavation
- Floor lowering and underpinning
- Party wall surveyor fees
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a basement conversion in Kempston Hardwick?
Whether you need planning permission depends on your house and its location in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most basement conversions:
- Structural and ground survey
- Underpinning or new structure where needed
- Insulation, ventilation and drainage pumps
- Lightwells and windows
- Party wall notices
- Waterproofing design (tanking or cavity drain membrane)
How long does it take?
The build itself usually takes 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals come first and typically take 3 to 5 months, depending on the approval route.
Building in Kempston Hardwick
Across the East of England, 1930s and post-war semis, newer estates and rural cottages all feature, each with different extension and loft options.
From MK45 outwards, we take on projects throughout Kempston Hardwick and the surrounding parts of Bedfordshire.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about basement conversions in Kempston Hardwick
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How long does a basement conversion take in Kempston Hardwick?
Typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals beforehand usually take 3 to 5 months.
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.
How much does a basement conversion cost in Kempston Hardwick?
In Kempston Hardwick, a basement conversion typically costs £2,000–£3,400 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £60,000–£102,000. Your fixed price depends on the survey and drawings.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.