What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Liverpool?
In Liverpool, a basement conversion typically costs £1,800–£3,000 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £54,000–£90,000. That range is adjusted for the North West, where domestic building work typically costs around 6% below the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £38,000–£63,000 |
| Typical project (30 m²) | £54,000–£90,000 |
| Larger project (42 m²) | £75,500–£126,000 |
| Rate per m² | £1,800–£3,000 |
The biggest cost drivers are:
- Ground water and access
- Lightwells
- Existing cellar or new excavation
- Waterproofing system
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a basement conversion in Liverpool?
Approvals for a basement conversion in Liverpool follow the rules for England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
The work we manage on a basement conversion:
- Lightwells and windows
- Underpinning or new structure where needed
- Structural and ground survey
- Insulation, ventilation and drainage pumps
- Waterproofing design (tanking or cavity drain membrane)
- Building control sign-off
How long does it take?
Expect 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Liverpool
The North West has many brick terraces and inter-war semis, where kitchen extensions and dormer loft conversions add space without moving.
Our Liverpool coverage includes postcode districts L1, L2, L3 and L4, and we also work in nearby places such as Birkenhead, Wallasey and Litherland.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about basement conversions in Liverpool
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How long does a basement conversion take in Liverpool?
Typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals beforehand usually take 3 to 5 months.
Do I need party wall agreements?
In England and Wales, excavating near a neighbour’s foundations usually triggers the Party Wall etc. Act 1996.
How much does a basement conversion cost in Liverpool?
In Liverpool, a basement conversion typically costs £1,800–£3,000 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £54,000–£90,000. Your fixed price depends on the survey and drawings.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.