What is a dormer loft conversion?
A dormer loft conversion adds a box-shaped structure to the rear roof slope, creating vertical walls and full headroom across most of the new room. It is the most common loft conversion in the UK because it works on terraced, semi-detached and detached houses.
How much does a dormer loft conversion cost in Coulsdon?
In Coulsdon, a dormer loft conversion typically costs £62,500–£88,500 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). The guide for Coulsdon reflects typical costs in London, roughly 30% above the UK-wide figure. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical rear dormer with en-suite | £62,500–£88,500 |
| Higher specification | £88,500–£110,500 |
Your quote will depend mainly on:
- En-suite or bathroom
- Built-in storage and finishes
- Scaffolding and access
- Fire safety upgrades to the existing house
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a dormer loft conversion in Coulsdon?
Before anything is built in Coulsdon, we confirm which approvals apply in England. In England a rear dormer is often permitted development if the extra roof volume is no more than 40 cubic metres on a terraced house or 50 on other houses, it does not face the road, sits no higher than the ridge and is set back from the eaves, with matching materials and obscure-glazed side windows. Balconies, front dormers and work in conservation areas need planning permission.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most dormer loft conversions:
- New staircase and fire-safe escape route
- Party wall notices for shared walls
- Building control completion certificate
- Drawings and structural calculations
- Steel beams and new floor joists
- Dormer structure, roof covering and windows
How long does it take?
Allow 6 to 9 weeks on site. Allow time beforehand for drawings and approvals, usually 6 to 12 weeks.
Building in Coulsdon
Many London boroughs have conservation areas and detailed design guides, so early design advice saves time at the planning stage.
From CR5 outwards, we take on projects throughout Coulsdon and the surrounding parts of Greater London.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about dormer loft conversions in Coulsdon
How much does a dormer loft conversion cost in Coulsdon?
In Coulsdon, a dormer loft conversion typically costs £62,500–£88,500 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Do you build dormer loft conversions in Coulsdon?
Yes. We build dormer loft conversions across Coulsdon, including postcodes CR5. Every project starts with a free home visit.
What fire safety is required?
Building regulations require a safe escape route. Converting a two-storey house to three storeys usually means a protected stairway with fire doors to habitable rooms and mains-wired smoke alarms.
Will I need to move out?
No. Most of the work is done from scaffolding and the roof. The new staircase is formed near the end, which causes a few days of disruption.
How much head height do I need?
Ideally at least 2.2 metres from the top of the ceiling joists to the underside of the ridge. Less can still work with a dormer, but we check this at the survey.