What is a dormer loft conversion?

A dormer loft conversion adds a box-shaped structure to the rear roof slope, creating vertical walls and full headroom across most of the new room. It is the most common loft conversion in the UK because it works on terraced, semi-detached and detached houses.
How much does a dormer loft conversion cost in Herne Bay?
In Herne Bay, a dormer loft conversion typically costs £54,000–£76,000 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). That range is adjusted for the South East, where domestic building work typically costs around 12% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical rear dormer with en-suite | £54,000–£76,000 |
| Higher specification | £76,000–£95,000 |
The main things that change the cost:
- Built-in storage and finishes
- Fire safety upgrades to the existing house
- Staircase position
- Scaffolding and access
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a dormer loft conversion in Herne Bay?
Here is how the rules work for a dormer loft conversion in England. In England a rear dormer is often permitted development if the extra roof volume is no more than 40 cubic metres on a terraced house or 50 on other houses, it does not face the road, sits no higher than the ridge and is set back from the eaves, with matching materials and obscure-glazed side windows. Balconies, front dormers and work in conservation areas need planning permission.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
On a typical dormer loft conversion we handle:
- Dormer structure, roof covering and windows
- Measured survey and head-height check
- Party wall notices for shared walls
- Building control completion certificate
- New staircase and fire-safe escape route
- Insulation, plastering, electrics and plumbing
How long does it take?
The build itself usually takes 6 to 9 weeks on site. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Herne Bay
Commuter towns across the South East have many 1930s and post-war semis that suit rear extensions and hip-to-gable loft conversions.
Projects in Herne Bay (CT6) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about dormer loft conversions in Herne Bay
How much does a dormer loft conversion cost in Herne Bay?
In Herne Bay, a dormer loft conversion typically costs £54,000–£76,000 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
What fire safety is required?
Building regulations require a safe escape route. Converting a two-storey house to three storeys usually means a protected stairway with fire doors to habitable rooms and mains-wired smoke alarms.
Do you build dormer loft conversions in Herne Bay?
Yes. We build dormer loft conversions across Herne Bay, including postcodes CT6. Every project starts with a free home visit.
Will I need to move out?
No. Most of the work is done from scaffolding and the roof. The new staircase is formed near the end, which causes a few days of disruption.
How much head height do I need?
Ideally at least 2.2 metres from the top of the ceiling joists to the underside of the ridge. Less can still work with a dormer, but we check this at the survey.
