What is a dormer loft conversion?
A dormer loft conversion adds a box-shaped structure to the rear roof slope, creating vertical walls and full headroom across most of the new room. It is the most common loft conversion in the UK because it works on terraced, semi-detached and detached houses.
How much does a dormer loft conversion cost in Milford Haven?
In Milford Haven, a dormer loft conversion typically costs £44,000–£62,500 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). Prices across Wales are typically 8% below the UK average for this kind of work, which is reflected in the range for Milford Haven. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical rear dormer with en-suite | £44,000–£62,500 |
| Higher specification | £62,500–£78,000 |
What moves the price most:
- Scaffolding and access
- Built-in storage and finishes
- Staircase position
- Dormer size and roof structure
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a dormer loft conversion in Milford Haven?
Before anything is built in Milford Haven, we confirm which approvals apply in Wales. In Wales roof enlargements such as rear dormers can be permitted development within volume limits and design conditions. Dormers facing a road, balconies and conservation-area work need permission.
The Party Wall etc. Act 1996 applies in Wales, so notices must be served before work on a shared wall, on the boundary, or excavation close to a neighbour’s foundations.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most dormer loft conversions:
- Insulation, plastering, electrics and plumbing
- Building control completion certificate
- Dormer structure, roof covering and windows
- Measured survey and head-height check
- New staircase and fire-safe escape route
- Drawings and structural calculations
How long does it take?
Build time is typically 6 to 9 weeks on site. Allow time beforehand for drawings and approvals, usually 6 to 12 weeks.
Building in Milford Haven
Wales has many terraced valley streets, stone cottages and post-war estates, so extension designs are shaped by slopes, materials and local character.
Milford Haven sits in Dyfed, about 33 miles west of Carmarthen. We cover the whole of Milford Haven, including postcodes SA73.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about dormer loft conversions in Milford Haven
How much does a dormer loft conversion cost in Milford Haven?
In Milford Haven, a dormer loft conversion typically costs £44,000–£62,500 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
What fire safety is required?
Building regulations require a safe escape route. Converting a two-storey house to three storeys usually means a protected stairway with fire doors to habitable rooms and mains-wired smoke alarms.
How long does a dormer loft conversion take in Milford Haven?
Typically 6 to 9 weeks on site. Design and approvals beforehand usually take 6 to 12 weeks.
Will I need to move out?
No. Most of the work is done from scaffolding and the roof. The new staircase is formed near the end, which causes a few days of disruption.
Do I need planning permission for a dormer loft conversion in Milford Haven?
In Wales roof enlargements such as rear dormers can be permitted development within volume limits and design conditions. Dormers facing a road, balconies and conservation-area work need permission.
How much head height do I need?
Ideally at least 2.2 metres from the top of the ceiling joists to the underside of the ridge. Less can still work with a dormer, but we check this at the survey.