What is a glazed extension?
A glazed or contemporary extension uses large panes of glass, slim aluminium frames and modern cladding to create a bright room that contrasts with the original house. Frameless corners, structural glass roofs and minimal sliding doors are typical features.
How much does a glazed extension cost in Battersea?
In Battersea, a glazed extension typically costs £3,650–£5,450 per m² of floor area, including VAT at 20% (standard rate). For a typical 18 m² project that is roughly £65,500–£98,000. We start from a UK-wide guide and adjust it for London, where labour and materials are typically about 30% above average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (13 m²) | £47,500–£71,000 |
| Typical project (18 m²) | £65,500–£98,000 |
| Larger project (25 m²) | £91,000–£136,000 |
| Rate per m² | £3,650–£5,450 |
Your quote will depend mainly on:
- Overheating and energy design
- Access for large glass panels
- Lighting and finishes
- Cladding material
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a glazed extension in Battersea?
Here is how the rules work for a glazed extension in England. In England a single-storey rear extension is often permitted development: broadly up to 3 metres deep on a semi-detached or terraced house and 4 metres on a detached house, no higher than 4 metres, with eaves no higher than 3 metres within 2 metres of a boundary, and covering no more than half the garden. The larger home extension scheme allows up to 6 or 8 metres if you notify the council first and neighbours have a chance to comment. In conservation areas, National Parks and National Landscapes the larger home extension route, side extensions and cladding are not permitted development. Flats and houses whose rights have been removed need a planning application, and listed buildings need listed building consent.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
The work we manage on a glazed extension:
- Energy and overheating calculations where needed
- Structural design for steel frames and glass supports
- Contemporary design and planning drawings
- Electrics, heating and finishes
- Large-format sliding doors and fixed glazing
- Foundations, walls and insulated roof
How long does it take?
Build time is typically 12 to 16 weeks on site; glazing lead times can be 6 to 10 weeks. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.
Building in Battersea
Space is at a premium in London, so homeowners often build out into the side return or up into the roof rather than move.
If your home is in Battersea or close by in Wandsworth, Chelsea and Clapham, a free home visit is the first step.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about glazed extensions in Battersea
How much does a glazed extension cost in Battersea?
In Battersea, a glazed extension typically costs £3,650–£5,450 per m² of floor area, including VAT at 20% (standard rate). A typical 18 m² project comes to roughly £65,500–£98,000. Your fixed price depends on the survey and drawings.
Will a glass extension be too hot in summer?
It can be if poorly designed. Solar-control glass, roof overhangs and opening vents reduce overheating, and building regulations may require calculations to show the design works.
Can large glass panels be lifted in?
Some need a crane or glass-lifting robot. We plan access during design.
Is triple glazing necessary?
Not always. High-performance double glazing can meet the standards; triple glazing helps in exposed locations.
How long does a glazed extension take in Battersea?
Typically 12 to 16 weeks on site; glazing lead times can be 6 to 10 weeks. Design and approvals beforehand usually take 3 to 4 months.