What is a hip-to-gable loft conversion?
A hip-to-gable loft conversion replaces the sloping side (the hip) of a semi-detached or detached roof with a vertical gable wall. This extends the ridge and creates enough space for a staircase and a full-size room, usually combined with a rear dormer.
How much does a hip-to-gable loft conversion cost in Burton upon Trent?
In Burton upon Trent, a hip-to-gable loft conversion typically costs £53,500–£75,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Building costs in the West Midlands are close to the UK average, so the figures for Burton upon Trent are close to our national guide. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A hip-to-gable with rear dormer | £53,500–£75,500 |
| Higher specification | £75,500–£94,500 |
The main things that change the cost:
- Scaffolding to three sides
- Bathroom and plumbing
- Size of the rear dormer
- Gable wall construction and finish
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a hip-to-gable loft conversion in Burton upon Trent?
The approval route for Burton upon Trent is set by planning law in England. In England a hip-to-gable conversion is often permitted development within the 50 cubic metre roof volume limit for semi-detached and detached houses, provided the gable does not face a road and the house is not in a conservation area.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
What we take care of:
- Drawings and structural calculations
- Staircase and fire-safe escape route
- Building control sign-off
- Steel beams and floor joists
- Survey and planning check
- Roof extension and rear dormer
How long does it take?
Allow 7 to 10 weeks on site. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Burton upon Trent
The West Midlands has large numbers of 1930s semis and Victorian terraces, which suit rear extensions, side extensions and dormer loft conversions.
From DE14 outwards, we take on projects throughout Burton upon Trent and the surrounding parts of Staffordshire.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about hip-to-gable loft conversions in Burton upon Trent
Will I need building regulations approval?
Yes. All loft conversions to habitable rooms need building control approval for structure, fire safety, insulation and stairs.
How much does a hip-to-gable loft conversion cost in Burton upon Trent?
In Burton upon Trent, a hip-to-gable loft conversion typically costs £53,500–£75,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
How long does it take?
Typically 7 to 10 weeks on site.
Is a hip-to-gable better than a dormer?
On a hipped roof, a dormer alone often leaves too little space for stairs. Combining hip-to-gable with a rear dormer gives the most room.
Who approves a hip-to-gable loft conversion in Burton upon Trent?
Planning matters in Burton upon Trent go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.