What is a hip-to-gable loft conversion?
A hip-to-gable loft conversion replaces the sloping side (the hip) of a semi-detached or detached roof with a vertical gable wall. This extends the ridge and creates enough space for a staircase and a full-size room, usually combined with a rear dormer.
How much does a hip-to-gable loft conversion cost in Didcot?
In Didcot, a hip-to-gable loft conversion typically costs £61,500–£87,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for the South East, where labour and materials are typically about 12% above average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A hip-to-gable with rear dormer | £61,500–£87,500 |
| Higher specification | £87,500–£109,500 |
What moves the price most:
- Staircase design
- Size of the rear dormer
- Scaffolding to three sides
- Roof tile matching
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a hip-to-gable loft conversion in Didcot?
Approvals for a hip-to-gable loft conversion in Didcot follow the rules for England. In England a hip-to-gable conversion is often permitted development within the 50 cubic metre roof volume limit for semi-detached and detached houses, provided the gable does not face a road and the house is not in a conservation area.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
What we take care of:
- Building control sign-off
- Survey and planning check
- Roof extension and rear dormer
- Gable wall built in brick or block and finished to match
- Steel beams and floor joists
- Drawings and structural calculations
How long does it take?
Expect 7 to 10 weeks on site. Before that, surveys, drawings and approvals usually take 6 to 12 weeks, longer if the council asks for changes.
Building in Didcot
Commuter towns across the South East have many 1930s and post-war semis that suit rear extensions and hip-to-gable loft conversions.
From OX11 outwards, we take on projects throughout Didcot and the surrounding parts of Oxfordshire.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about hip-to-gable loft conversions in Didcot
How much does a hip-to-gable loft conversion cost in Didcot?
In Didcot, a hip-to-gable loft conversion typically costs £61,500–£87,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Is a hip-to-gable better than a dormer?
On a hipped roof, a dormer alone often leaves too little space for stairs. Combining hip-to-gable with a rear dormer gives the most room.
Will it look strange next to my neighbour?
On a pair of semis the roofs will no longer match unless your neighbour does the same. Many streets already have several converted roofs.
How long does it take?
Typically 7 to 10 weeks on site.
Do you build hip-to-gable loft conversions in Didcot?
Yes. We build hip-to-gable loft conversions across Didcot, including postcodes OX11. Every project starts with a free home visit.