What is a hip-to-gable loft conversion?

A hip-to-gable loft conversion replaces the sloping side (the hip) of a semi-detached or detached roof with a vertical gable wall. This extends the ridge and creates enough space for a staircase and a full-size room, usually combined with a rear dormer.
How much does a hip-to-gable loft conversion cost in Lerwick?
In Lerwick, a hip-to-gable loft conversion typically costs £53,500–£75,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Island and remote projects usually cost more than this guide because of shipping, travel and accommodation. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A hip-to-gable with rear dormer | £53,500–£75,500 |
| Higher specification | £75,500–£94,500 |
Your quote will depend mainly on:
- Roof tile matching
- Size of the rear dormer
- Staircase design
- Scaffolding to three sides
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a hip-to-gable loft conversion in Lerwick?
The approval route for Lerwick is set by planning law in Scotland. In Scotland changing a hipped roof to a gable often needs planning permission, because dormer and roof enlargement rights only apply well away from boundaries. A building warrant is needed before work starts.
Scotland has no Party Wall Act. Work on shared walls is governed by your title deeds, the Tenements (Scotland) Act 2004 for flats, and common law, so we agree arrangements with neighbours in writing before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
What we take care of:
- Survey and planning check
- Steel beams and floor joists
- Building control sign-off
- Gable wall built in brick or block and finished to match
- Staircase and fire-safe escape route
- Insulation, electrics, plumbing and plastering
How long does it take?
Allow 7 to 10 weeks on site. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Lerwick
In Scotland, bungalows and one-and-a-half-storey homes are common, so dormer conversions are a popular way to add bedrooms.
Because Lerwick is reached by sea, we confirm availability before quoting and list shipping and travel costs separately.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about hip-to-gable loft conversions in Lerwick
Is a hip-to-gable better than a dormer?
On a hipped roof, a dormer alone often leaves too little space for stairs. Combining hip-to-gable with a rear dormer gives the most room.
How long does a hip-to-gable loft conversion take in Lerwick?
Typically 7 to 10 weeks on site. Design and approvals beforehand usually take 6 to 12 weeks.
Will I need building regulations approval?
Yes. All loft conversions to habitable rooms need building control approval for structure, fire safety, insulation and stairs.
Will it look strange next to my neighbour?
On a pair of semis the roofs will no longer match unless your neighbour does the same. Many streets already have several converted roofs.
How much does a hip-to-gable loft conversion cost in Lerwick?
In Lerwick, a hip-to-gable loft conversion typically costs £53,500–£75,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Do I need planning permission for a hip-to-gable loft conversion in Lerwick?
In Scotland changing a hipped roof to a gable often needs planning permission, because dormer and roof enlargement rights only apply well away from boundaries. A building warrant is needed before work starts.
