What is a hip-to-gable loft conversion?
A hip-to-gable loft conversion replaces the sloping side (the hip) of a semi-detached or detached roof with a vertical gable wall. This extends the ridge and creates enough space for a staircase and a full-size room, usually combined with a rear dormer.
How much does a hip-to-gable loft conversion cost in Stourport-on-Severn?
In Stourport-on-Severn, a hip-to-gable loft conversion typically costs £53,500–£75,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Prices in the West Midlands sit near the national average for this kind of work, and the range for Stourport-on-Severn reflects that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A hip-to-gable with rear dormer | £53,500–£75,500 |
| Higher specification | £75,500–£94,500 |
The biggest cost drivers are:
- Roof tile matching
- Staircase design
- Scaffolding to three sides
- Size of the rear dormer
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a hip-to-gable loft conversion in Stourport-on-Severn?
Whether you need planning permission depends on your house and its location in England. In England a hip-to-gable conversion is often permitted development within the 50 cubic metre roof volume limit for semi-detached and detached houses, provided the gable does not face a road and the house is not in a conservation area.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
The work we manage on a hip-to-gable loft conversion:
- Survey and planning check
- Staircase and fire-safe escape route
- Gable wall built in brick or block and finished to match
- Drawings and structural calculations
- Insulation, electrics, plumbing and plastering
- Building control sign-off
How long does it take?
Build time is typically 7 to 10 weeks on site. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Stourport-on-Severn
The West Midlands has large numbers of 1930s semis and Victorian terraces, which suit rear extensions, side extensions and dormer loft conversions.
We work across Stourport-on-Severn and neighbouring areas such as Kidderminster, Droitwich and Bromsgrove. Postcodes we cover in Stourport-on-Severn include DY13.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about hip-to-gable loft conversions in Stourport-on-Severn
Is a hip-to-gable better than a dormer?
On a hipped roof, a dormer alone often leaves too little space for stairs. Combining hip-to-gable with a rear dormer gives the most room.
Do you build hip-to-gable loft conversions in Stourport-on-Severn?
Yes. We build hip-to-gable loft conversions across Stourport-on-Severn, including postcodes DY13. Every project starts with a free home visit.
Will I need building regulations approval?
Yes. All loft conversions to habitable rooms need building control approval for structure, fire safety, insulation and stairs.
How much does a hip-to-gable loft conversion cost in Stourport-on-Severn?
In Stourport-on-Severn, a hip-to-gable loft conversion typically costs £53,500–£75,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Can the gable be brick?
Yes. We match the existing finish, whether brick, render or pebbledash.