What is a side extension?
A side extension builds into the space beside a semi-detached or detached house, often over a driveway or side passage. It can be single-storey, for a utility room, downstairs toilet or study, or two-storey to add a bedroom above.
How much does a side extension cost in Paignton?
In Paignton, a side extension typically costs £1,750–£2,700 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £49,000–£75,500. Prices in the South West sit near the national average for this kind of work, and the range for Paignton reflects that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £35,000–£54,000 |
| Typical project (28 m²) | £49,000–£75,500 |
| Larger project (39 m²) | £68,000–£105,500 |
| Rate per m² | £1,750–£2,700 |
What moves the price most:
- Boundary walls and access for materials
- Steel work where the side wall is opened
- Single or two storeys
- Roof design and tile matching
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Do you need planning permission for a side extension in Paignton?
The approval route for Paignton is set by planning law in England. In England a single-storey side extension can be permitted development if it is no more than 4 metres high and no wider than half the width of the original house. Side extensions of more than one storey always need planning permission, as do side extensions in conservation areas, National Parks and National Landscapes.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
What we take care of:
- Electrics, heating and plastering
- Opening into the existing house
- Planning drawings and application
- Structural calculations
- Foundations and drainage alterations
- Walls, roof and windows to match the house
How long does it take?
Allow 10 to 16 weeks on site depending on size and storeys. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Paignton
In parts of the South West, protected landscapes and conservation areas shape what can be built, so materials and roof forms are chosen carefully.
Paignton sits in Devon, about 20 miles south of Exeter. We cover the whole of Paignton, including postcodes TQ3.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about side extensions in Paignton
How close to the boundary can I build?
You can build up to the boundary, but the eaves height near it is limited under permitted development, and planning officers often want a gap at first floor. If you build on or near a shared boundary, party wall rules may apply.
Will I lose my driveway?
A side extension often takes the side drive. We look at whether parking can be kept at the front and whether a dropped kerb is needed.
How long does a side extension take in Paignton?
Typically 10 to 16 weeks on site depending on size and storeys. Design and approvals beforehand usually take 3 to 4 months.
Can a side extension go over a drain?
Often yes, with a build-over agreement from the water company or by rerouting the drain. We check this during the survey.
How much does a side extension cost in Paignton?
In Paignton, a side extension typically costs £1,750–£2,700 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £49,000–£75,500. Your fixed price depends on the survey and drawings.