What is a side return extension?

A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Bradford?
In Bradford, a side return extension typically costs £2,150–£3,050 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £26,000–£36,500. Building costs in Yorkshire and the Humber run about 7% below the UK average, and the figures for Bradford are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £17,000–£24,500 |
| Typical project (12 m²) | £26,000–£36,500 |
| Larger project (17 m²) | £36,500–£52,000 |
| Rate per m² | £2,150–£3,050 |
Your quote will depend mainly on:
- Length of the side return
- Party wall surveyor fees
- Steel beams and propping of the back addition
- Access through the house for materials
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a side return extension in Bradford?
Approvals for a side return extension in Bradford follow the rules for England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Glazed or solid roof with insulation
- Drawings and planning or permitted development check
- Party wall advice and notices
- Building control sign-off
- Steel beams to remove the side wall
- Foundations and drainage, including any build-over agreement
How long does it take?
Build time is typically 10 to 14 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Bradford
In Yorkshire, through-terraces and back-to-backs have particular constraints, while semis and detached houses suit larger extensions.
If your home is in Bradford or close by in Shipley, Pudsey and Cleckheaton, a free home visit is the first step.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about side return extensions in Bradford
Can I stay in the house?
Usually, though the kitchen will be out of action for several weeks. We plan a temporary kitchen area where possible.
How do you get materials in?
Mid-terrace houses often have no rear access, so materials come through the house. We protect floors and plan deliveries carefully.
How much does a side return extension cost in Bradford?
In Bradford, a side return extension typically costs £2,150–£3,050 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £26,000–£36,500. Your fixed price depends on the survey and drawings.
How long does a side return extension take in Bradford?
Typically 10 to 14 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.
