What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Congleton?
In Congleton, a side return extension typically costs £2,150–£3,100 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £26,000–£37,000. Building costs in the North West run about 6% below the UK average, and the figures for Congleton are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £17,000–£25,000 |
| Typical project (12 m²) | £26,000–£37,000 |
| Larger project (17 m²) | £36,500–£52,500 |
| Rate per m² | £2,150–£3,100 |
Your quote will depend mainly on:
- Length of the side return
- Access through the house for materials
- Steel beams and propping of the back addition
- Moving drains and soil stacks
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a side return extension in Congleton?
Before anything is built in Congleton, we confirm which approvals apply in England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
What we take care of:
- Foundations and drainage, including any build-over agreement
- Survey of party walls, drains and the existing back addition
- Building control sign-off
- Glazed or solid roof with insulation
- Steel beams to remove the side wall
- Drawings and planning or permitted development check
How long does it take?
Build time is typically 10 to 14 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.
Building in Congleton
The North West has many brick terraces and inter-war semis, where kitchen extensions and dormer loft conversions add space without moving.
Our Congleton coverage includes postcode districts CW12, and we also work in nearby places such as Kidsgrove, Macclesfield and Leek.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about side return extensions in Congleton
How much does a side return extension cost in Congleton?
In Congleton, a side return extension typically costs £2,150–£3,100 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £26,000–£37,000. Your fixed price depends on the survey and drawings.
Is a glass roof too hot or cold?
Modern solar-control double or triple glazing reduces glare and heat loss. Building regulations also limit how much glazing you can have unless the design shows it performs well enough.
Can I stay in the house?
Usually, though the kitchen will be out of action for several weeks. We plan a temporary kitchen area where possible.
Who approves a side return extension in Congleton?
Planning matters in Congleton go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
How do you get materials in?
Mid-terrace houses often have no rear access, so materials come through the house. We protect floors and plan deliveries carefully.