What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Essex?
In Essex, a side return extension typically costs £2,450–£3,500 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £29,500–£42,000. That range is adjusted for the East of England, where domestic building work typically costs around 6% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £19,500–£28,000 |
| Typical project (12 m²) | £29,500–£42,000 |
| Larger project (17 m²) | £41,500–£59,500 |
| Rate per m² | £2,450–£3,500 |
The main things that change the cost:
- Moving drains and soil stacks
- Access through the house for materials
- Steel beams and propping of the back addition
- Length of the side return
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a side return extension in Essex?
The approval route for Essex is set by planning law in England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
What we take care of:
- Building control sign-off
- Survey of party walls, drains and the existing back addition
- Glazed or solid roof with insulation
- Steel beams to remove the side wall
- Drawings and planning or permitted development check
- Foundations and drainage, including any build-over agreement
How long does it take?
Allow 10 to 14 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Essex
Many towns in the East of England have estates built since the 1970s, where garage conversions and rear extensions are popular.
Towns we cover in Essex include Southend-on-Sea, Basildon, Colchester, Chelmsford, Harlow and Grays.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about side return extensions in Essex
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.
How much does a side return extension cost in Essex?
In Essex, a side return extension typically costs £2,450–£3,500 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £29,500–£42,000. Your fixed price depends on the survey and drawings.
How long does a side return extension take in Essex?
Typically 10 to 14 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
Can I stay in the house?
Usually, though the kitchen will be out of action for several weeks. We plan a temporary kitchen area where possible.
Is a glass roof too hot or cold?
Modern solar-control double or triple glazing reduces glare and heat loss. Building regulations also limit how much glazing you can have unless the design shows it performs well enough.