What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Swansea?
In Swansea, a side return extension typically costs £2,100–£3,050 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £25,000–£36,500. Building costs in Wales run about 8% below the UK average, and the figures for Swansea are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £17,000–£24,500 |
| Typical project (12 m²) | £25,000–£36,500 |
| Larger project (17 m²) | £35,500–£52,000 |
| Rate per m² | £2,100–£3,050 |
The biggest cost drivers are:
- Glazed roof specification
- Steel beams and propping of the back addition
- Length of the side return
- Moving drains and soil stacks
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a side return extension in Swansea?
Approvals for a side return extension in Swansea follow the rules for Wales. In Wales a side return infill is treated as a single-storey side extension: it can be permitted development within the 4 metre height and 50% width limits, but many terraced streets are in conservation areas or have removed rights. Party wall notices are usually needed.
Building regulations in Wales are set by the Welsh Government. Approval comes from the council’s building control service or a registered building control approver, with inspections during the work and a completion certificate at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
Handled as part of most side return extensions:
- Survey of party walls, drains and the existing back addition
- Glazed or solid roof with insulation
- Floor levelling, heating and electrics
- Foundations and drainage, including any build-over agreement
- Building control sign-off
- Steel beams to remove the side wall
How long does it take?
Expect 10 to 14 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.
Building in Swansea
Wales has many terraced valley streets, stone cottages and post-war estates, so extension designs are shaped by slopes, materials and local character.
From SA1 outwards, we take on projects throughout Swansea and the surrounding parts of West Glamorgan.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about side return extensions in Swansea
Is a glass roof too hot or cold?
Modern solar-control double or triple glazing reduces glare and heat loss. Building regulations also limit how much glazing you can have unless the design shows it performs well enough.
How do you get materials in?
Mid-terrace houses often have no rear access, so materials come through the house. We protect floors and plan deliveries carefully.
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.
How much does a side return extension cost in Swansea?
In Swansea, a side return extension typically costs £2,100–£3,050 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £25,000–£36,500. Your fixed price depends on the survey and drawings.
How long does a side return extension take in Swansea?
Typically 10 to 14 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
Do I need planning permission for a side return extension in Swansea?
In Wales a side return infill is treated as a single-storey side extension: it can be permitted development within the 4 metre height and 50% width limits, but many terraced streets are in conservation areas or have removed rights. Party wall notices are usually needed.