What is a single-storey extension?

A single-storey extension is a ground-floor addition, usually at the rear of a house, that enlarges a kitchen, living or dining space. Most are built with cavity walls on concrete foundations and finished with a flat roof and roof lantern or a pitched tiled roof.
How much does a single-storey extension cost in Liversedge?
In Liversedge, a single-storey extension typically costs £1,800–£2,700 per m² of floor area, including VAT at 20% (standard rate). For a typical 20 m² project that is roughly £36,000–£54,000. Building costs in Yorkshire and the Humber run about 7% below the UK average, and the figures for Liversedge are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (14 m²) | £25,000–£38,000 |
| Typical project (20 m²) | £36,000–£54,000 |
| Larger project (28 m²) | £50,500–£75,500 |
| Rate per m² | £1,800–£2,700 |
What moves the price most:
- Glazing: sliding and bifold doors cost more than French doors
- Ground conditions and foundation depth
- Kitchen, flooring and finishes, which we can include or leave to you
- Roof type and the size of any lantern or roof windows
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a single-storey extension in Liversedge?
The approval route for Liversedge is set by planning law in England. In England a single-storey rear extension is often permitted development: broadly up to 3 metres deep on a semi-detached or terraced house and 4 metres on a detached house, no higher than 4 metres, with eaves no higher than 3 metres within 2 metres of a boundary, and covering no more than half the garden. The larger home extension scheme allows up to 6 or 8 metres if you notify the council first and neighbours have a chance to comment. In conservation areas, National Parks and National Landscapes the larger home extension route, side extensions and cladding are not permitted development. Flats and houses whose rights have been removed need a planning application, and listed buildings need listed building consent.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
What we take care of:
- Cavity walls, insulation and roof to current building regulations
- Foundations, drainage and any build-over agreement
- Knock-through to the existing house with steel beams
- Measured survey and design drawings
- First and second fix electrics, heating and plastering
- Building control inspections and completion certificate
How long does it take?
The build itself usually takes 10 to 14 weeks on site for a typical rear extension, after approvals. Allow time beforehand for drawings and approvals, usually 6 to 12 weeks.
Building in Liversedge
Yorkshire and the Humber has stone and brick terraces as well as inter-war and newer estates, so materials matching is an early design question.
We work across Liversedge and neighbouring areas such as Cleckheaton, Mirfield and Dewsbury. Postcodes we cover in Liversedge include WF15.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about single-storey extensions in Liversedge
Who approves a single-storey extension in Liversedge?
Planning matters in Liversedge go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
How much does a single-storey extension cost in Liversedge?
In Liversedge, a single-storey extension typically costs £1,800–£2,700 per m² of floor area, including VAT at 20% (standard rate). A typical 20 m² project comes to roughly £36,000–£54,000. Your fixed price depends on the survey and drawings.
Is VAT charged on an extension?
Yes. Building work on an existing home is standard-rated, so VAT at 20% applies. Our guide prices include it.
How long does a single-storey extension take?
Once approvals are in place, a typical rear extension takes 10 to 14 weeks on site. Design and approvals usually take another 6 to 12 weeks beforehand, depending on whether a planning application is needed.
Can I stay in the house during the build?
Usually yes. We build the shell before opening up the back wall, so the house stays weathertight for most of the job. There will be a few weeks when the kitchen or back room is out of use.
