What is a small housing development?

A small housing development is a scheme of a few new homes, typically two to nine, on a single site. We work with landowners, small developers and investors to build schemes that already have planning permission, or help take a site through planning first.
How much does a small housing development cost in Billingham?
In Billingham, a small housing development typically costs £1,600–£2,450 per m² of floor area (build cost), including VAT at 0% (zero-rated for qualifying new dwellings). For a typical 400 m² project that is roughly £640,000–£980,000. Building costs in the North East run about 10% below the UK average, and the figures for Billingham are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (280 m²) | £448,000–£686,000 |
| Typical project (400 m²) | £640,000–£980,000 |
| Larger project (560 m²) | £896,000–£1,372,000 |
| Rate per m² | £1,600–£2,450 |
What moves the price most:
- Ground conditions
- Roads, sewers and adoption agreements
- Specification
- Planning conditions and obligations
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Do you need planning permission for a small housing development in Billingham?
Here is how the rules work for a small housing development in England. In England small schemes need full planning permission and may involve a section 106 agreement, the Community Infrastructure Levy, highways and drainage approvals, and biodiversity net gain where it applies.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
Handled as part of most small housing developments:
- Warranty and building control inspections
- Handover packs for each home
- Groundworks, roads and drainage
- Design development and discharge of conditions
- Utility connections
- External works and landscaping
How long does it take?
Build time is typically 12 to 24 months depending on scheme size. Design and approvals come first and typically take 6 to 12 months, depending on the approval route.
Building in Billingham
Across the North East, colliery-era terraces and newer estates sit side by side, so the right project depends on the house type.
Our Billingham coverage includes postcode districts TS23, and we also work in nearby places such as Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about small housing developments in Billingham
Is VAT charged on new homes?
Construction of qualifying new dwellings is normally zero-rated for VAT.
Who handles road adoption?
We build roads and sewers to adoptable standards where agreements are in place with the highway authority and water company.
Do you work with landowners?
Yes. If you own land, with or without planning permission, we can discuss building on it with you.
How much does a small housing development cost in Billingham?
In Billingham, a small housing development typically costs £1,600–£2,450 per m² of floor area (build cost), including VAT at 0% (zero-rated for qualifying new dwellings). A typical 400 m² project comes to roughly £640,000–£980,000. Your fixed price depends on the survey and drawings.
How long does a small housing development take in Billingham?
Typically 12 to 24 months depending on scheme size. Design and approvals beforehand usually take 6 to 12 months.
