What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Herefordshire?
In Herefordshire, a structural alteration typically costs £4,250–£9,250 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Prices in the West Midlands sit near the national average for this kind of work, and the range for Herefordshire reflects that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,250–£9,250 |
| Higher specification | £9,250–£11,500 |
The biggest cost drivers are:
- What sits above the wall
- Span of the opening
- Floor and ceiling repairs
- Moving radiators, sockets and pipes
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a structural alteration in Herefordshire?
Whether you need planning permission depends on your house and its location in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
Handled as part of most structural alterations:
- Steel beam supply and installation on padstones
- Building control sign-off
- Fire protection to the steel
- Building control application
- Structural engineer’s calculations and drawings
- Temporary propping
How long does it take?
Build time is typically 1 to 2 weeks on site for a typical knock-through. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Herefordshire
The West Midlands has large numbers of 1930s semis and Victorian terraces, which suit rear extensions, side extensions and dormer loft conversions.
Towns we cover in Herefordshire include Hereford, Leominster and Ledbury.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about structural alterations in Herefordshire
What fire protection does a steel need?
Usually fire-rated plasterboard or intumescent paint, as building control requires.
How long does a knock-through take?
Usually 1 to 2 weeks on site, plus a few days for plastering to dry.
How much does a structural alteration cost in Herefordshire?
In Herefordshire, a structural alteration typically costs £4,250–£9,250 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
How do I know if a wall is load-bearing?
Only a survey can confirm it. Walls that carry floor joists, roof loads or walls above are load-bearing. We check on site and the engineer confirms.
Do you build structural alterations in Herefordshire?
Yes. We build structural alterations across Herefordshire, including postcodes HR1, HR2, HR3, HR4 and HR5. Every project starts with a free home visit.