What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Hertfordshire?
In Hertfordshire, a structural alteration typically costs £4,750–£10,000 for a typical knock-through with steel beam, including VAT at 20% (standard rate). The guide for Hertfordshire reflects typical costs in the East of England, roughly 6% above the UK-wide figure. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,750–£10,000 |
| Higher specification | £10,000–£12,500 |
The biggest cost drivers are:
- Floor and ceiling repairs
- Span of the opening
- Flush or downstand beam
- What sits above the wall
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a structural alteration in Hertfordshire?
Before anything is built in Hertfordshire, we confirm which approvals apply in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
What we take care of:
- Structural engineer’s calculations and drawings
- Temporary propping
- Party wall notices where needed
- Fire protection to the steel
- Building control application
- Steel beam supply and installation on padstones
How long does it take?
Allow 1 to 2 weeks on site for a typical knock-through. Allow time beforehand for drawings and approvals, usually 6 to 12 weeks.
Building in Hertfordshire
Across the East of England, 1930s and post-war semis, newer estates and rural cottages all feature, each with different extension and loft options.
Towns we cover in Hertfordshire include Watford, Hemel Hempstead, Stevenage, St Albans, Welwyn Garden City and Cheshunt.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about structural alterations in Hertfordshire
What fire protection does a steel need?
Usually fire-rated plasterboard or intumescent paint, as building control requires.
Who approves a structural alteration in Hertfordshire?
Planning matters in Hertfordshire go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Can the beam be hidden?
Often, by setting it within the ceiling depth. It depends on the joists and span.
How much does a structural alteration cost in Hertfordshire?
In Hertfordshire, a structural alteration typically costs £4,750–£10,000 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Do I need building regulations approval?
Yes. Removing a load-bearing wall is building work that needs approval, with calculations for the beam.