What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Neath?
In Neath, a structural alteration typically costs £4,250–£8,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for Wales, where labour and materials are typically about 8% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,250–£8,750 |
| Higher specification | £8,750–£11,000 |
Your quote will depend mainly on:
- Party wall involvement
- Floor and ceiling repairs
- Span of the opening
- What sits above the wall
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a structural alteration in Neath?
Before anything is built in Neath, we confirm which approvals apply in Wales. In Wales removing a load-bearing wall needs building regulations approval with structural calculations, and party wall notices where a shared wall is involved.
The Party Wall etc. Act 1996 applies in Wales, so notices must be served before work on a shared wall, on the boundary, or excavation close to a neighbour’s foundations.
We check this for your address before design work starts, so there are no surprises later.
What we handle
The work we manage on a structural alteration:
- Fire protection to the steel
- Making good, plastering and flooring repairs
- Party wall notices where needed
- Building control sign-off
- Steel beam supply and installation on padstones
- Structural engineer’s calculations and drawings
How long does it take?
Build time is typically 1 to 2 weeks on site for a typical knock-through. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Neath
Wales has many terraced valley streets, stone cottages and post-war estates, so extension designs are shaped by slopes, materials and local character.
Projects in Neath (SA11) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about structural alterations in Neath
What fire protection does a steel need?
Usually fire-rated plasterboard or intumescent paint, as building control requires.
How much does a structural alteration cost in Neath?
In Neath, a structural alteration typically costs £4,250–£8,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Can the beam be hidden?
Often, by setting it within the ceiling depth. It depends on the joists and span.
Do I need planning permission for a structural alteration in Neath?
In Wales removing a load-bearing wall needs building regulations approval with structural calculations, and party wall notices where a shared wall is involved.
Do you build structural alterations in Neath?
Yes. We build structural alterations across Neath, including postcodes SA11. Every project starts with a free home visit.
How do I know if a wall is load-bearing?
Only a survey can confirm it. Walls that carry floor joists, roof loads or walls above are load-bearing. We check on site and the engineer confirms.