What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Worthing?
In Worthing, a structural alteration typically costs £5,000–£10,500 for a typical knock-through with steel beam, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for the South East, where labour and materials are typically about 12% above average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £5,000–£10,500 |
| Higher specification | £10,500–£13,000 |
What moves the price most:
- What sits above the wall
- Flush or downstand beam
- Party wall involvement
- Span of the opening
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a structural alteration in Worthing?
The approval route for Worthing is set by planning law in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Building control sign-off
- Building control application
- Making good, plastering and flooring repairs
- Fire protection to the steel
- Steel beam supply and installation on padstones
- Structural engineer’s calculations and drawings
How long does it take?
Allow 1 to 2 weeks on site for a typical knock-through. Before that, surveys, drawings and approvals usually take 6 to 12 weeks, longer if the council asks for changes.
Building in Worthing
The South East has a broad mix of housing, from Victorian terraces in the towns to post-war semis and newer estates, so extension types vary street by street.
If your home is in Worthing or close by in Lancing, Shoreham-by-Sea and Portslade, a free home visit is the first step.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about structural alterations in Worthing
How long does a knock-through take?
Usually 1 to 2 weeks on site, plus a few days for plastering to dry.
Who approves a structural alteration in Worthing?
Planning matters in Worthing go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Do I need a party wall notice?
In England and Wales, if the beam sits in a party wall, yes.
How much does a structural alteration cost in Worthing?
In Worthing, a structural alteration typically costs £5,000–£10,500 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Can the beam be hidden?
Often, by setting it within the ceiling depth. It depends on the joists and span.