SK Developments Free home visit0800 088 6248 Get a quote

Greater LondonWraparound extensions

Wraparound extensions in Brixton

A wraparound extension in Brixton starts with understanding the house: its age, its structure and its plot. We survey, design, apply for approvals and build, all under one contract.

Guide price in Brixton

£2,850–£4,150 per m² of floor area

In Brixton, a wraparound extension typically costs £2,850–£4,150 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £80,000–£116,000.

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a wraparound extension?

L-shaped wraparound extension with a frameless glass corner and steel-look doors on a London terrace

A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.

How much does a wraparound extension cost in Brixton?

In Brixton, a wraparound extension typically costs £2,850–£4,150 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £80,000–£116,000. We start from a UK-wide guide and adjust it for London, where labour and materials are typically about 30% above average. Design, structural calculations and council fees are extra.

Guide prices for Brixton, including VAT at 20% (standard rate)
Size or typeGuide range
Smaller project (20 m²)£57,000–£83,000
Typical project (28 m²)£80,000–£116,000
Larger project (39 m²)£111,000–£162,000
Rate per m²£2,850–£4,150

The biggest cost drivers are:

  • Access for materials on terraced streets
  • Total footprint and the amount of glazing
  • Drainage changes
  • Steelwork and propping of the existing house

Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.

Do you need planning permission for a wraparound extension in Brixton?

Before anything is built in Brixton, we confirm which approvals apply in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.

Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.

Our first visit includes a check of your planning history, so you know the route before paying for drawings.

What we handle

From survey to sign-off, the job normally involves:

  • Removal of internal and external walls
  • Structural engineer’s design for steels and supports
  • Party wall notices and surveyor liaison
  • Underfloor heating option, electrics and plastering
  • Design and planning application
  • Walls, roof and glazing

How long does it take?

Allow 12 to 18 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.

Building in Brixton

Many London boroughs have conservation areas and detailed design guides, so early design advice saves time at the planning stage.

If your home is in Brixton or close by in Clapham, Dulwich and Peckham, a free home visit is the first step.

How it works

  1. 01

    Visit and measured survey

    A free visit to understand the project, check access and take measurements.

  2. 02

    Drawings and written quote

    We prepare the design and give you a written, itemised quote with inclusions and exclusions.

  3. 03

    Approvals

    Planning or permitted development confirmation, building regulations and any party wall matters.

  4. 04

    Construction and completion

    We build, put right any snags and hand over the building control certificate.

Questions about wraparound extensions in Brixton

Will both neighbours be affected?

Usually only the neighbour on the side return side, but rear foundations near either boundary can trigger party wall notices.

How much does a wraparound extension cost in Brixton?

In Brixton, a wraparound extension typically costs £2,850–£4,150 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £80,000–£116,000. Your fixed price depends on the survey and drawings.

What about the old back addition?

The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.

How long does it take to build?

Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.

Who approves a wraparound extension in Brixton?

Planning matters in Brixton go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.

Tell us about your project in Brixton and we will arrange a free home visit.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price