What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Denton?
In Denton, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £57,500–£84,000. We start from a UK-wide guide and adjust it for the North West, where labour and materials are typically about 6% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £41,000–£60,000 |
| Typical project (28 m²) | £57,500–£84,000 |
| Larger project (39 m²) | £80,000–£117,000 |
| Rate per m² | £2,050–£3,000 |
The biggest cost drivers are:
- Total footprint and the amount of glazing
- Party wall surveyor fees for one or both neighbours
- Access for materials on terraced streets
- Drainage changes
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a wraparound extension in Denton?
Approvals for a wraparound extension in Denton follow the rules for England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
On a typical wraparound extension we handle:
- Party wall notices and surveyor liaison
- Building control completion
- Structural engineer’s design for steels and supports
- Foundations and drainage
- Removal of internal and external walls
- Walls, roof and glazing
How long does it take?
Allow 12 to 18 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Denton
The North West has many brick terraces and inter-war semis, where kitchen extensions and dormer loft conversions add space without moving.
Our Denton coverage includes postcode districts M34, and we also work in nearby places such as Hyde, Dukinfield and Droylsden.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about wraparound extensions in Denton
How much does a wraparound extension cost in Denton?
In Denton, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £57,500–£84,000. Your fixed price depends on the survey and drawings.
Who approves a wraparound extension in Denton?
Planning matters in Denton go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
What about the old back addition?
The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.
Can we keep a separate living room?
Yes. Many clients keep the front room separate and open up only the back of the house.
Will both neighbours be affected?
Usually only the neighbour on the side return side, but rear foundations near either boundary can trigger party wall notices.