What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Dyfed?
In Dyfed, a wraparound extension typically costs £2,000–£2,950 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £56,000–£82,500. The guide for Dyfed reflects typical costs in Wales, roughly 8% below the UK-wide figure. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £40,000–£59,000 |
| Typical project (28 m²) | £56,000–£82,500 |
| Larger project (39 m²) | £78,000–£115,000 |
| Rate per m² | £2,000–£2,950 |
The main things that change the cost:
- Steelwork and propping of the existing house
- Access for materials on terraced streets
- Drainage changes
- Kitchen and flooring specification
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a wraparound extension in Dyfed?
Here is how the rules work for a wraparound extension in Wales. In Wales a wraparound extension combines side and rear elements; it can only be permitted development if each part meets the limits, so many need a householder planning application.
The Party Wall etc. Act 1996 applies in Wales, so notices must be served before work on a shared wall, on the boundary, or excavation close to a neighbour’s foundations.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
From survey to sign-off, the job normally involves:
- Structural engineer’s design for steels and supports
- Design and planning application
- Removal of internal and external walls
- Party wall notices and surveyor liaison
- Foundations and drainage
- Building control completion
How long does it take?
Build time is typically 12 to 18 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.
Building in Dyfed
Wales has many terraced valley streets, stone cottages and post-war estates, so extension designs are shaped by slopes, materials and local character.
Towns we cover in Dyfed include Llanelli, Ammanford, Aberystwyth, Carmarthen, Haverfordwest and Milford Haven.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about wraparound extensions in Dyfed
Who approves a wraparound extension in Dyfed?
Planning matters in Dyfed go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Is a wraparound worth it?
It gives the biggest ground-floor space without going upwards. Whether it adds value depends on your street and house, so we suggest checking local sale prices before committing.
How long does it take to build?
Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.
Do I need planning permission for a wraparound extension in Dyfed?
In Wales a wraparound extension combines side and rear elements; it can only be permitted development if each part meets the limits, so many need a householder planning application.
Will both neighbours be affected?
Usually only the neighbour on the side return side, but rear foundations near either boundary can trigger party wall notices.
How much does a wraparound extension cost in Dyfed?
In Dyfed, a wraparound extension typically costs £2,000–£2,950 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £56,000–£82,500. Your fixed price depends on the survey and drawings.