What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Golders Green?
In Golders Green, a wraparound extension typically costs £2,850–£4,150 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £80,000–£116,000. Prices across London are typically 30% above the UK average for this kind of work, which is reflected in the range for Golders Green. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £57,000–£83,000 |
| Typical project (28 m²) | £80,000–£116,000 |
| Larger project (39 m²) | £111,000–£162,000 |
| Rate per m² | £2,850–£4,150 |
The biggest cost drivers are:
- Steelwork and propping of the existing house
- Total footprint and the amount of glazing
- Drainage changes
- Access for materials on terraced streets
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a wraparound extension in Golders Green?
Whether you need planning permission depends on your house and its location in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Party wall notices and surveyor liaison
- Building control completion
- Removal of internal and external walls
- Structural engineer’s design for steels and supports
- Foundations and drainage
- Design and planning application
How long does it take?
The build itself usually takes 12 to 18 weeks on site. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.
Building in Golders Green
Victorian and Edwardian terraces dominate many London streets, which is why side return, wraparound and mansard projects are so common here.
Our Golders Green coverage includes postcode districts NW11, and we also work in nearby places such as Hampstead, Finchley and Hendon.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about wraparound extensions in Golders Green
How long does it take to build?
Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.
Does a wraparound extension need planning permission?
Almost always. Combining side and rear elements usually goes beyond permitted development limits, so a householder planning application is normally made.
How much does a wraparound extension cost in Golders Green?
In Golders Green, a wraparound extension typically costs £2,850–£4,150 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £80,000–£116,000. Your fixed price depends on the survey and drawings.
Do you build wraparound extensions in Golders Green?
Yes. We build wraparound extensions across Golders Green, including postcodes NW11. Every project starts with a free home visit.
What about the old back addition?
The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.