SK Developments Free home visit0800 088 6248 Get a quote

LancashireWraparound extensions

Wraparound extensions in Poulton-le-Fylde

Our wraparound extension service covers Poulton-le-Fylde and the surrounding parts of Lancashire. Every project starts with a free visit and ends with a completion certificate.

Guide price in Poulton-le-Fylde

£2,050–£3,000 per m² of floor area

In Poulton-le-Fylde, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £57,500–£84,000.

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a wraparound extension?

L-shaped wraparound extension with a frameless glass corner and steel-look doors on a London terrace

A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.

How much does a wraparound extension cost in Poulton-le-Fylde?

In Poulton-le-Fylde, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £57,500–£84,000. We start from a UK-wide guide and adjust it for the North West, where labour and materials are typically about 6% below average. Design, structural calculations and council fees are extra.

Guide prices for Poulton-le-Fylde, including VAT at 20% (standard rate)
Size or typeGuide range
Smaller project (20 m²)£41,000–£60,000
Typical project (28 m²)£57,500–£84,000
Larger project (39 m²)£80,000–£117,000
Rate per m²£2,050–£3,000

The main things that change the cost:

  • Total footprint and the amount of glazing
  • Steelwork and propping of the existing house
  • Kitchen and flooring specification
  • Access for materials on terraced streets

For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.

Do you need planning permission for a wraparound extension in Poulton-le-Fylde?

Whether you need planning permission depends on your house and its location in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.

Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.

We check this for your address before design work starts, so there are no surprises later.

What we handle

From survey to sign-off, the job normally involves:

  • Removal of internal and external walls
  • Underfloor heating option, electrics and plastering
  • Design and planning application
  • Building control completion
  • Walls, roof and glazing
  • Structural engineer’s design for steels and supports

How long does it take?

Allow 12 to 18 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.

Building in Poulton-le-Fylde

Terraced streets across the North West often suit rear dormers and single-storey kitchen extensions.

Projects in Poulton-le-Fylde (FY6) are surveyed in person before we quote, so the price reflects your actual property.

How it works

  1. 01

    Survey and brief

    We visit, discuss your ideas and budget, and survey the property or site at no cost.

  2. 02

    Design and fixed quote

    Drawings, structural calculations and an itemised, fixed price for the agreed specification.

  3. 03

    Approvals

    Planning or permitted development confirmation, building regulations and any party wall matters.

  4. 04

    Construction and completion

    We build, put right any snags and hand over the building control certificate.

Questions about wraparound extensions in Poulton-le-Fylde

What about the old back addition?

The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.

Can we keep a separate living room?

Yes. Many clients keep the front room separate and open up only the back of the house.

How long does a wraparound extension take in Poulton-le-Fylde?

Typically 12 to 18 weeks on site. Design and approvals beforehand usually take 3 to 4 months.

How much does a wraparound extension cost in Poulton-le-Fylde?

In Poulton-le-Fylde, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £57,500–£84,000. Your fixed price depends on the survey and drawings.

Is a wraparound worth it?

It gives the biggest ground-floor space without going upwards. Whether it adds value depends on your street and house, so we suggest checking local sale prices before committing.

Tell us about your project in Poulton-le-Fylde and we will arrange a free home visit.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price