SK Developments Free home visit0800 088 6248 Get a quote

North YorkshireWraparound extensions

Wraparound extensions in Selby

Thinking about a wraparound extension in Selby? We can take it from first ideas to finished, signed-off work, with a written programme before work starts.

Guide price in Selby

£2,050–£3,000 per m² of floor area

In Selby, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £57,500–£84,000.

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a wraparound extension?

L-shaped wraparound extension with a frameless glass corner and steel-look doors on a London terrace

A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.

How much does a wraparound extension cost in Selby?

In Selby, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £57,500–£84,000. Prices across Yorkshire and the Humber are typically 7% below the UK average for this kind of work, which is reflected in the range for Selby. Design, structural calculations and council fees are extra.

Guide prices for Selby, including VAT at 20% (standard rate)
Size or typeGuide range
Smaller project (20 m²)£41,000–£60,000
Typical project (28 m²)£57,500–£84,000
Larger project (39 m²)£80,000–£117,000
Rate per m²£2,050–£3,000

Your quote will depend mainly on:

  • Drainage changes
  • Steelwork and propping of the existing house
  • Party wall surveyor fees for one or both neighbours
  • Access for materials on terraced streets

A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.

Do you need planning permission for a wraparound extension in Selby?

Whether you need planning permission depends on your house and its location in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.

Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.

We check this for your address before design work starts, so there are no surprises later.

What we handle

On a typical wraparound extension we handle:

  • Structural engineer’s design for steels and supports
  • Design and planning application
  • Party wall notices and surveyor liaison
  • Building control completion
  • Underfloor heating option, electrics and plastering
  • Walls, roof and glazing

How long does it take?

Allow 12 to 18 weeks on site. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.

Building in Selby

Yorkshire and the Humber has stone and brick terraces as well as inter-war and newer estates, so materials matching is an early design question.

If your home is in Selby or close by in Goole, Pontefract and York, a free home visit is the first step.

How it works

  1. 01

    Free visit

    We look at the property, talk through what you want and measure up. There is no charge and no obligation.

  2. 02

    Design and fixed quote

    Drawings, structural calculations and an itemised, fixed price for the agreed specification.

  3. 03

    Approvals

    Planning or permitted development confirmation, building regulations and any party wall matters.

  4. 04

    Build and sign-off

    We run the build to a written programme and hand over the completion certificate.

Questions about wraparound extensions in Selby

Can we keep a separate living room?

Yes. Many clients keep the front room separate and open up only the back of the house.

How much does a wraparound extension cost in Selby?

In Selby, a wraparound extension typically costs £2,050–£3,000 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £57,500–£84,000. Your fixed price depends on the survey and drawings.

How long does a wraparound extension take in Selby?

Typically 12 to 18 weeks on site. Design and approvals beforehand usually take 3 to 4 months.

Is a wraparound worth it?

It gives the biggest ground-floor space without going upwards. Whether it adds value depends on your street and house, so we suggest checking local sale prices before committing.

What about the old back addition?

The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.

Start with a guide price, then book a free survey for a fixed quote in Selby.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price