What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Somerset?
In Somerset, a wraparound extension typically costs £2,250–£3,250 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £63,000–£91,000. Building costs in the South West are close to the UK average, so the figures for Somerset are close to our national guide. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £45,000–£65,000 |
| Typical project (28 m²) | £63,000–£91,000 |
| Larger project (39 m²) | £88,000–£127,000 |
| Rate per m² | £2,250–£3,250 |
The main things that change the cost:
- Total footprint and the amount of glazing
- Drainage changes
- Party wall surveyor fees for one or both neighbours
- Access for materials on terraced streets
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a wraparound extension in Somerset?
Whether you need planning permission depends on your house and its location in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
On a typical wraparound extension we handle:
- Building control completion
- Structural engineer’s design for steels and supports
- Design and planning application
- Party wall notices and surveyor liaison
- Foundations and drainage
- Walls, roof and glazing
How long does it take?
Expect 12 to 18 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.
Building in Somerset
In parts of the South West, protected landscapes and conservation areas shape what can be built, so materials and roof forms are chosen carefully.
Towns we cover in Somerset include Mendip, Bath, Weston-super-Mare, Taunton, Yeovil and Bridgwater.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about wraparound extensions in Somerset
Do you build wraparound extensions in Somerset?
Yes. We build wraparound extensions across Somerset, including postcodes BA1, BA10, BA11, BA16 and BA2. Every project starts with a free home visit.
Does a wraparound extension need planning permission?
Almost always. Combining side and rear elements usually goes beyond permitted development limits, so a householder planning application is normally made.
How much does a wraparound extension cost in Somerset?
In Somerset, a wraparound extension typically costs £2,250–£3,250 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £63,000–£91,000. Your fixed price depends on the survey and drawings.
What about the old back addition?
The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.
How long does it take to build?
Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.