SK Developments Free home visit0800 088 6248 Get a quote

EssexWraparound extensions

Wraparound extensions in Stanford-le-Hope

SK Developments builds wraparound extensions in Stanford-le-Hope, about 12 miles west of Southend-on-Sea. We look after the design, the planning or permitted development check, building control and the build itself.

Guide price in Stanford-le-Hope

£2,350–£3,400 per m² of floor area

In Stanford-le-Hope, a wraparound extension typically costs £2,350–£3,400 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £66,000–£95,000.

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a wraparound extension?

L-shaped wraparound extension with a frameless glass corner and steel-look doors on a London terrace

A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.

How much does a wraparound extension cost in Stanford-le-Hope?

In Stanford-le-Hope, a wraparound extension typically costs £2,350–£3,400 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £66,000–£95,000. The guide for Stanford-le-Hope reflects typical costs in the East of England, roughly 6% above the UK-wide figure. Design, structural calculations and council fees are extra.

Guide prices for Stanford-le-Hope, including VAT at 20% (standard rate)
Size or typeGuide range
Smaller project (20 m²)£47,000–£68,000
Typical project (28 m²)£66,000–£95,000
Larger project (39 m²)£91,500–£132,500
Rate per m²£2,350–£3,400

What moves the price most:

  • Steelwork and propping of the existing house
  • Party wall surveyor fees for one or both neighbours
  • Access for materials on terraced streets
  • Drainage changes

Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.

Do you need planning permission for a wraparound extension in Stanford-le-Hope?

The approval route for Stanford-le-Hope is set by planning law in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.

Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.

If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.

What we handle

Handled as part of most wraparound extensions:

  • Party wall notices and surveyor liaison
  • Removal of internal and external walls
  • Walls, roof and glazing
  • Underfloor heating option, electrics and plastering
  • Building control completion
  • Structural engineer’s design for steels and supports

How long does it take?

Expect 12 to 18 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.

Building in Stanford-le-Hope

Many towns in the East of England have estates built since the 1970s, where garage conversions and rear extensions are popular.

Stanford-le-Hope sits in Essex, about 12 miles west of Southend-on-Sea. We cover the whole of Stanford-le-Hope, including postcodes SS17.

How it works

  1. 01

    Survey and brief

    We visit, discuss your ideas and budget, and survey the property or site at no cost.

  2. 02

    Design and fixed quote

    Drawings, structural calculations and an itemised, fixed price for the agreed specification.

  3. 03

    Approvals

    Planning or permitted development confirmation, building regulations and any party wall matters.

  4. 04

    Build and handover

    Work follows the agreed programme, with inspections along the way and a completion certificate at the end.

Questions about wraparound extensions in Stanford-le-Hope

How much does a wraparound extension cost in Stanford-le-Hope?

In Stanford-le-Hope, a wraparound extension typically costs £2,350–£3,400 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £66,000–£95,000. Your fixed price depends on the survey and drawings.

Does a wraparound extension need planning permission?

Almost always. Combining side and rear elements usually goes beyond permitted development limits, so a householder planning application is normally made.

Can we keep a separate living room?

Yes. Many clients keep the front room separate and open up only the back of the house.

Do you build wraparound extensions in Stanford-le-Hope?

Yes. We build wraparound extensions across Stanford-le-Hope, including postcodes SS17. Every project starts with a free home visit.

How long does it take to build?

Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.

Ready to talk about a wraparound extension in Stanford-le-Hope? Book a free home visit or get an instant guide price.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price