What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Buckley?
In Buckley, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). The guide for Buckley reflects typical costs in Wales, roughly 8% below the UK-wide figure. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,500–£4,250 |
| Larger or more complex projects | £4,250–£5,250 |
The biggest cost drivers are:
- Project size and complexity
- 3D visuals
- Number of design options
- Structural engineer’s fees
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Planning and building regulations in Buckley
The approval route for Buckley is set by planning law in Wales. In Wales drawings are prepared to suit the council’s validation requirements and Welsh building regulations.
The Party Wall etc. Act 1996 applies in Wales, so notices must be served before work on a shared wall, on the boundary, or excavation close to a neighbour’s foundations.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
Handled as part of most architectural drawings:
- Structural calculations coordinated
- Measured survey of the existing house
- Party wall drawings where needed
- Building regulations drawings and specification
- Planning drawings: plans, elevations, site and location plans
- 3D views on request
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Buckley
Wales has many terraced valley streets, stone cottages and post-war estates, so extension designs are shaped by slopes, materials and local character.
From CH7 outwards, we take on projects throughout Buckley and the surrounding parts of Clwyd.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Drawings and documents
The drawings and forms the council and building control need.
- 04
Approval
We follow the application through to a decision and pass on the approved drawings.
Questions about architectural drawings in Buckley
Do I need an architect?
Not necessarily. For extensions and lofts, an architectural technician’s drawings are common. For complex or sensitive sites, an architect may be better.
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
How much does a set of architectural drawings cost in Buckley?
In Buckley, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Do you prepare architectural drawings in Buckley?
Yes. We prepare architectural drawings across Buckley, including postcodes CH7. Every project starts with a free home visit.