What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Lincolnshire?
In Lincolnshire, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for the East Midlands, where labour and materials are typically about 5% below average. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,500–£4,250 |
| Larger or more complex projects | £4,250–£5,250 |
Your quote will depend mainly on:
- Number of design options
- Structural engineer’s fees
- 3D visuals
- Planning or building regulations stage
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Planning and building regulations in Lincolnshire
Approvals for a set of architectural drawings in Lincolnshire follow the rules for England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
From survey to sign-off, the job normally involves:
- Measured survey of the existing house
- Structural calculations coordinated
- Party wall drawings where needed
- Tender-ready drawing pack
- 3D views on request
- Design options and sketch layouts
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Lincolnshire
The East Midlands has a mix of red-brick terraces, inter-war semis and newer estates, so rear extensions and garage conversions are common projects.
Towns we cover in Lincolnshire include Lincoln, Grimsby, Scunthorpe, Boston, Grantham and Cleethorpes.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Design options
Sketch layouts to agree the approach before detailed drawing starts.
- 03
Drawings and documents
The drawings and forms the council and building control need.
- 04
Approval
We follow the application through to a decision and pass on the approved drawings.
Questions about architectural drawings in Lincolnshire
How much does a set of architectural drawings cost in Lincolnshire?
In Lincolnshire, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
How long do drawings take?
Typically 2 to 6 weeks from survey, depending on revisions.
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
Do you prepare architectural drawings in Lincolnshire?
Yes. We prepare architectural drawings across Lincolnshire, including postcodes DN15, DN16, DN17, DN18 and DN19. Every project starts with a free home visit.
What are building regulations drawings?
More detailed drawings and specifications showing structure, insulation, fire safety, drainage and ventilation, used for building control approval and pricing.