What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Melton Mowbray?
In Melton Mowbray, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). That range is adjusted for the East Midlands, where domestic building work typically costs around 5% below the national average. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,500–£4,250 |
| Larger or more complex projects | £4,250–£5,250 |
The main things that change the cost:
- 3D visuals
- Measured survey complexity
- Project size and complexity
- Structural engineer’s fees
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Planning and building regulations in Melton Mowbray
Here is how the rules work for a set of architectural drawings in England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
Handled as part of most architectural drawings:
- Structural calculations coordinated
- Design options and sketch layouts
- Party wall drawings where needed
- Building regulations drawings and specification
- Measured survey of the existing house
- 3D views on request
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Melton Mowbray
The East Midlands has a mix of red-brick terraces, inter-war semis and newer estates, so rear extensions and garage conversions are common projects.
Our Melton Mowbray coverage includes postcode districts LE13, and we also work in nearby places such as Oakham, Loughborough and Leicester.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Drawings and documents
The drawings and forms the council and building control need.
- 04
Submission and follow-up
We submit the application and deal with questions from the council or building control.
Questions about architectural drawings in Melton Mowbray
How long do drawings take?
Typically 2 to 6 weeks from survey, depending on revisions.
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
Do you prepare architectural drawings in Melton Mowbray?
Yes. We prepare architectural drawings across Melton Mowbray, including postcodes LE13. Every project starts with a free home visit.
How much does a set of architectural drawings cost in Melton Mowbray?
In Melton Mowbray, a set of architectural drawings typically costs £1,500–£4,250 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.