What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Forest Hill?
In Forest Hill, a basement conversion typically costs £2,450–£4,150 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £73,500–£124,500. That range is adjusted for London, where domestic building work typically costs around 30% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £51,500–£87,000 |
| Typical project (30 m²) | £73,500–£124,500 |
| Larger project (42 m²) | £103,000–£174,500 |
| Rate per m² | £2,450–£4,150 |
The main things that change the cost:
- Waterproofing system
- Lightwells
- Party wall surveyor fees
- Floor lowering and underpinning
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a basement conversion in Forest Hill?
Before anything is built in Forest Hill, we confirm which approvals apply in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
From survey to sign-off, the job normally involves:
- Insulation, ventilation and drainage pumps
- Structural and ground survey
- Lightwells and windows
- Party wall notices
- Electrics, heating and plastering
- Underpinning or new structure where needed
How long does it take?
Allow 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Forest Hill
Many London boroughs have conservation areas and detailed design guides, so early design advice saves time at the planning stage.
Projects in Forest Hill (SE23) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about basement conversions in Forest Hill
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.
Does a basement conversion need planning permission?
Converting an existing cellar without changing the outside usually does not. New excavation, lightwells and changes visible from outside usually do.
Do you build basement conversions in Forest Hill?
Yes. We build basement conversions across Forest Hill, including postcodes SE23. Every project starts with a free home visit.
How much does a basement conversion cost in Forest Hill?
In Forest Hill, a basement conversion typically costs £2,450–£4,150 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £73,500–£124,500. Your fixed price depends on the survey and drawings.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.