What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Selby?
In Selby, a basement conversion typically costs £1,750–£3,000 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £52,500–£90,000. That range is adjusted for Yorkshire and the Humber, where domestic building work typically costs around 7% below the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £37,000–£63,000 |
| Typical project (30 m²) | £52,500–£90,000 |
| Larger project (42 m²) | £73,500–£126,000 |
| Rate per m² | £1,750–£3,000 |
Your quote will depend mainly on:
- Lightwells
- Party wall surveyor fees
- Existing cellar or new excavation
- Floor lowering and underpinning
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a basement conversion in Selby?
Whether you need planning permission depends on your house and its location in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Underpinning or new structure where needed
- Lightwells and windows
- Waterproofing design (tanking or cavity drain membrane)
- Structural and ground survey
- Insulation, ventilation and drainage pumps
- Party wall notices
How long does it take?
The build itself usually takes 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Selby
Yorkshire and the Humber has stone and brick terraces as well as inter-war and newer estates, so materials matching is an early design question.
If your home is in Selby or close by in Goole, Pontefract and York, a free home visit is the first step.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about basement conversions in Selby
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.
How much does a basement conversion cost in Selby?
In Selby, a basement conversion typically costs £1,750–£3,000 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £52,500–£90,000. Your fixed price depends on the survey and drawings.
How long does a basement conversion take in Selby?
Typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals beforehand usually take 3 to 5 months.
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.