What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Stockton-on-Tees?
In Stockton-on-Tees, a basement conversion typically costs £1,700–£2,900 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £51,000–£87,000. Building costs in the North East run about 10% below the UK average, and the figures for Stockton-on-Tees are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £35,500–£61,000 |
| Typical project (30 m²) | £51,000–£87,000 |
| Larger project (42 m²) | £71,500–£122,000 |
| Rate per m² | £1,700–£2,900 |
The main things that change the cost:
- Existing cellar or new excavation
- Party wall surveyor fees
- Waterproofing system
- Floor lowering and underpinning
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Do you need planning permission for a basement conversion in Stockton-on-Tees?
Before anything is built in Stockton-on-Tees, we confirm which approvals apply in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
On a typical basement conversion we handle:
- Lightwells and windows
- Party wall notices
- Insulation, ventilation and drainage pumps
- Waterproofing design (tanking or cavity drain membrane)
- Underpinning or new structure where needed
- Structural and ground survey
How long does it take?
Allow 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals come first and typically take 3 to 5 months, depending on the approval route.
Building in Stockton-on-Tees
The North East has many terraced streets and post-war semis, where rear extensions and loft conversions are popular ways to gain space.
Projects in Stockton-on-Tees (TS19) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about basement conversions in Stockton-on-Tees
How long does a basement conversion take in Stockton-on-Tees?
Typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals beforehand usually take 3 to 5 months.
Does a basement conversion need planning permission?
Converting an existing cellar without changing the outside usually does not. New excavation, lightwells and changes visible from outside usually do.
How much does a basement conversion cost in Stockton-on-Tees?
In Stockton-on-Tees, a basement conversion typically costs £1,700–£2,900 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £51,000–£87,000. Your fixed price depends on the survey and drawings.
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.