What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Washington?
In Washington, a basement conversion typically costs £1,700–£2,900 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £51,000–£87,000. Building costs in the North East run about 10% below the UK average, and the figures for Washington are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £35,500–£61,000 |
| Typical project (30 m²) | £51,000–£87,000 |
| Larger project (42 m²) | £71,500–£122,000 |
| Rate per m² | £1,700–£2,900 |
The main things that change the cost:
- Party wall surveyor fees
- Lightwells
- Waterproofing system
- Floor lowering and underpinning
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a basement conversion in Washington?
The approval route for Washington is set by planning law in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
Handled as part of most basement conversions:
- Insulation, ventilation and drainage pumps
- Building control sign-off
- Party wall notices
- Lightwells and windows
- Structural and ground survey
- Electrics, heating and plastering
How long does it take?
The build itself usually takes 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Washington
Across the North East, colliery-era terraces and newer estates sit side by side, so the right project depends on the house type.
Washington sits in Tyne and Wear, about 6 miles south-east of Newcastle upon Tyne. We cover the whole of Washington, including postcodes NE37 and NE38.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about basement conversions in Washington
How much does a basement conversion cost in Washington?
In Washington, a basement conversion typically costs £1,700–£2,900 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £51,000–£87,000. Your fixed price depends on the survey and drawings.
Do you build basement conversions in Washington?
Yes. We build basement conversions across Washington, including postcodes NE37 and NE38. Every project starts with a free home visit.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.
How long does it take?
A cellar conversion takes around 8 to 16 weeks; new basements take longer.