What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Washington?
In Washington, a side return extension typically costs £2,050–£2,950 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £24,500–£35,500. We start from a UK-wide guide and adjust it for the North East, where labour and materials are typically about 10% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £16,500–£23,500 |
| Typical project (12 m²) | £24,500–£35,500 |
| Larger project (17 m²) | £35,000–£50,000 |
| Rate per m² | £2,050–£2,950 |
Your quote will depend mainly on:
- Party wall surveyor fees
- Glazed roof specification
- Moving drains and soil stacks
- Access through the house for materials
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a side return extension in Washington?
Before anything is built in Washington, we confirm which approvals apply in England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
Handled as part of most side return extensions:
- Party wall advice and notices
- Survey of party walls, drains and the existing back addition
- Building control sign-off
- Glazed or solid roof with insulation
- Steel beams to remove the side wall
- Foundations and drainage, including any build-over agreement
How long does it take?
The build itself usually takes 10 to 14 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Washington
Across the North East, colliery-era terraces and newer estates sit side by side, so the right project depends on the house type.
We work across Washington and neighbouring areas such as Chester-le-Street, Houghton-Le-Spring and Hebburn. Postcodes we cover in Washington include NE37 and NE38.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about side return extensions in Washington
How much does a side return extension cost in Washington?
In Washington, a side return extension typically costs £2,050–£2,950 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £24,500–£35,500. Your fixed price depends on the survey and drawings.
Can I stay in the house?
Usually, though the kitchen will be out of action for several weeks. We plan a temporary kitchen area where possible.
How do you get materials in?
Mid-terrace houses often have no rear access, so materials come through the house. We protect floors and plan deliveries carefully.
How long does a side return extension take in Washington?
Typically 10 to 14 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.