What is a glazed extension?
A glazed or contemporary extension uses large panes of glass, slim aluminium frames and modern cladding to create a bright room that contrasts with the original house. Frameless corners, structural glass roofs and minimal sliding doors are typical features.
How much does a glazed extension cost in Thornaby-on-Tees?
In Thornaby-on-Tees, a glazed extension typically costs £2,600–£3,900 per m² of floor area, including VAT at 20% (standard rate). For a typical 18 m² project that is roughly £47,000–£70,000. We start from a UK-wide guide and adjust it for Yorkshire and the Humber, where labour and materials are typically about 7% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (13 m²) | £34,000–£50,500 |
| Typical project (18 m²) | £47,000–£70,000 |
| Larger project (25 m²) | £65,000–£97,500 |
| Rate per m² | £2,600–£3,900 |
Your quote will depend mainly on:
- Steel framing
- Glazing size, specification and lead time
- Cladding material
- Overheating and energy design
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a glazed extension in Thornaby-on-Tees?
Here is how the rules work for a glazed extension in England. In England a single-storey rear extension is often permitted development: broadly up to 3 metres deep on a semi-detached or terraced house and 4 metres on a detached house, no higher than 4 metres, with eaves no higher than 3 metres within 2 metres of a boundary, and covering no more than half the garden. The larger home extension scheme allows up to 6 or 8 metres if you notify the council first and neighbours have a chance to comment. In conservation areas, National Parks and National Landscapes the larger home extension route, side extensions and cladding are not permitted development. Flats and houses whose rights have been removed need a planning application, and listed buildings need listed building consent.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Cladding or render finish
- Energy and overheating calculations where needed
- Foundations, walls and insulated roof
- Electrics, heating and finishes
- Structural design for steel frames and glass supports
- Building control sign-off
How long does it take?
Build time is typically 12 to 16 weeks on site; glazing lead times can be 6 to 10 weeks. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Thornaby-on-Tees
In Yorkshire, through-terraces and back-to-backs have particular constraints, while semis and detached houses suit larger extensions.
From TS17 outwards, we take on projects throughout Thornaby-on-Tees and the surrounding parts of North Yorkshire.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about glazed extensions in Thornaby-on-Tees
Will a glass extension be too hot in summer?
It can be if poorly designed. Solar-control glass, roof overhangs and opening vents reduce overheating, and building regulations may require calculations to show the design works.
How much does a glazed extension cost in Thornaby-on-Tees?
In Thornaby-on-Tees, a glazed extension typically costs £2,600–£3,900 per m² of floor area, including VAT at 20% (standard rate). A typical 18 m² project comes to roughly £47,000–£70,000. Your fixed price depends on the survey and drawings.
How long does a glazed extension take in Thornaby-on-Tees?
Typically 12 to 16 weeks on site; glazing lead times can be 6 to 10 weeks. Design and approvals beforehand usually take 3 to 4 months.
Does it need planning permission?
The same rules as other extensions apply, but contemporary designs in conservation areas are assessed carefully. We discuss the design approach with you before applying.
Can large glass panels be lifted in?
Some need a crane or glass-lifting robot. We plan access during design.