What is a hip-to-gable loft conversion?
A hip-to-gable loft conversion replaces the sloping side (the hip) of a semi-detached or detached roof with a vertical gable wall. This extends the ridge and creates enough space for a staircase and a full-size room, usually combined with a rear dormer.
How much does a hip-to-gable loft conversion cost in Selby?
In Selby, a hip-to-gable loft conversion typically costs £51,000–£72,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for Yorkshire and the Humber, where labour and materials are typically about 7% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A hip-to-gable with rear dormer | £51,000–£72,500 |
| Higher specification | £72,500–£90,500 |
Your quote will depend mainly on:
- Size of the rear dormer
- Bathroom and plumbing
- Staircase design
- Scaffolding to three sides
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a hip-to-gable loft conversion in Selby?
Approvals for a hip-to-gable loft conversion in Selby follow the rules for England. In England a hip-to-gable conversion is often permitted development within the 50 cubic metre roof volume limit for semi-detached and detached houses, provided the gable does not face a road and the house is not in a conservation area.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most hip-to-gable loft conversions:
- Drawings and structural calculations
- Steel beams and floor joists
- Building control sign-off
- Insulation, electrics, plumbing and plastering
- Roof extension and rear dormer
- Survey and planning check
How long does it take?
The build itself usually takes 7 to 10 weeks on site. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Selby
In Yorkshire, through-terraces and back-to-backs have particular constraints, while semis and detached houses suit larger extensions.
Selby sits in North Yorkshire, about 12 miles south of York. We cover the whole of Selby, including postcodes YO8.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about hip-to-gable loft conversions in Selby
Will I need building regulations approval?
Yes. All loft conversions to habitable rooms need building control approval for structure, fire safety, insulation and stairs.
How long does a hip-to-gable loft conversion take in Selby?
Typically 7 to 10 weeks on site. Design and approvals beforehand usually take 6 to 12 weeks.
Is a hip-to-gable conversion permitted development?
Often yes in England, within the 50 cubic metre roof volume limit for semi-detached and detached houses. It is not permitted development in conservation areas or where rights have been removed.
How much does a hip-to-gable loft conversion cost in Selby?
In Selby, a hip-to-gable loft conversion typically costs £51,000–£72,500 for a hip-to-gable with rear dormer, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Can the gable be brick?
Yes. We match the existing finish, whether brick, render or pebbledash.