What is a side extension?
A side extension builds into the space beside a semi-detached or detached house, often over a driveway or side passage. It can be single-storey, for a utility room, downstairs toilet or study, or two-storey to add a bedroom above.
How much does a side extension cost in Billingham?
In Billingham, a side extension typically costs £1,550–£2,400 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £43,500–£67,000. We start from a UK-wide guide and adjust it for the North East, where labour and materials are typically about 10% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £31,000–£48,000 |
| Typical project (28 m²) | £43,500–£67,000 |
| Larger project (39 m²) | £60,500–£93,500 |
| Rate per m² | £1,550–£2,400 |
The biggest cost drivers are:
- Boundary walls and access for materials
- Single or two storeys
- Drains, gas meters or soil pipes that need moving
- Roof design and tile matching
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a side extension in Billingham?
Here is how the rules work for a side extension in England. In England a single-storey side extension can be permitted development if it is no more than 4 metres high and no wider than half the width of the original house. Side extensions of more than one storey always need planning permission, as do side extensions in conservation areas, National Parks and National Landscapes.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
What we take care of:
- Walls, roof and windows to match the house
- Survey of the boundary, drains and access
- Building control completion
- Planning drawings and application
- Electrics, heating and plastering
- Opening into the existing house
How long does it take?
Allow 10 to 16 weeks on site depending on size and storeys. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.
Building in Billingham
The North East has many terraced streets and post-war semis, where rear extensions and loft conversions are popular ways to gain space.
Projects in Billingham (TS23) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about side extensions in Billingham
Will a two-storey side extension look odd?
Not if it is designed well. Setting it back from the front and keeping the roof lower than the main ridge usually gives a natural look and is what most councils ask for.
Who approves a side extension in Billingham?
Planning matters in Billingham go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
How much does a side extension cost in Billingham?
In Billingham, a side extension typically costs £1,550–£2,400 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £43,500–£67,000. Your fixed price depends on the survey and drawings.
How long does it take?
Roughly 10 to 16 weeks on site once approvals are in place, depending on whether it is one or two storeys.
How close to the boundary can I build?
You can build up to the boundary, but the eaves height near it is limited under permitted development, and planning officers often want a gap at first floor. If you build on or near a shared boundary, party wall rules may apply.