What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Garston?
In Garston, a side return extension typically costs £2,150–£3,100 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £26,000–£37,000. We start from a UK-wide guide and adjust it for the North West, where labour and materials are typically about 6% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £17,000–£25,000 |
| Typical project (12 m²) | £26,000–£37,000 |
| Larger project (17 m²) | £36,500–£52,500 |
| Rate per m² | £2,150–£3,100 |
Your quote will depend mainly on:
- Glazed roof specification
- Moving drains and soil stacks
- Access through the house for materials
- Steel beams and propping of the back addition
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Do you need planning permission for a side return extension in Garston?
Here is how the rules work for a side return extension in England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
From survey to sign-off, the job normally involves:
- Floor levelling, heating and electrics
- Steel beams to remove the side wall
- Foundations and drainage, including any build-over agreement
- Party wall advice and notices
- Glazed or solid roof with insulation
- Drawings and planning or permitted development check
How long does it take?
Allow 10 to 14 weeks on site. Before that, surveys, drawings and approvals usually take 3 to 4 months, longer if the council asks for changes.
Building in Garston
Terraced streets across the North West often suit rear dormers and single-storey kitchen extensions.
Our Garston coverage includes postcode districts L19, and we also work in nearby places such as Speke, Halewood and Ellesmere Port Town.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about side return extensions in Garston
How much does a side return extension cost in Garston?
In Garston, a side return extension typically costs £2,150–£3,100 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £26,000–£37,000. Your fixed price depends on the survey and drawings.
How long does a side return extension take in Garston?
Typically 10 to 14 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
Can I stay in the house?
Usually, though the kitchen will be out of action for several weeks. We plan a temporary kitchen area where possible.
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.
Is a glass roof too hot or cold?
Modern solar-control double or triple glazing reduces glare and heat loss. Building regulations also limit how much glazing you can have unless the design shows it performs well enough.